Advertisement
Quick Links
Caution
Disc Flattener DF-2
3F, 7-11-1 Nishi-Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan
----------------------------------------------------
Users Manual
----------------------------------------------------
Version：2012/4
Furutech Co., Ltd.
Tel +81-3-5437-0281
Fax +81-3-5437-8470
www.furutech.com
Please Do Not Operate This Product Until You Have
Read and Fully Understood the Instructions
Advertisement
Related Manuals for Furutech DF-2
Summary of Contents for Furutech DF-2
- Page 1 Please Do Not Operate This Product Until You Have Caution Read and Fully Understood the Instructions ---------------------------------------------------- Disc Flattener DF-2 Users Manual ---------------------------------------------------- Version：2012/4 ...
- Page 2 6. Do not operate unit with a damaged power cord, or if the unit has been dropped or damaged. To reduce the risk of electric shock do not disassemble or attempt to repair the DF-2; take it to a qualified service technician for examination and repair.
-
Page 3: Table Of Contents
Contents • Package Contents • Description • Caution • Instructions • Flattening Procedure Chart • Specifications ... -
Page 4: Package Contents
Caution: Before attempting to flatten any rare or valuable LPs, please test and become familiar with the operation of the DF-2 on an LP of no value. Results cannot be guaranteed and LPs cannot be returned to perfect condition. -
Page 5: Caution
Please be sure to test on an LP of no value before use on rare and valuable LPs. Results cannot be guaranteed. • If an LP is not corrected after the first treatment then it cannot be treated with the DF-2. Do not carry out repeat treatments. This could damage the LP. ... -
Page 6: Instructions
4. Instructions Place the DF-2 on a level, stable surface as seen in the illustration below. Connect the provided AC cord, and then unlock both latches. Gently open the clamshell heating plates. The plates can only open 30 degrees and can be locked in an open position using the side support bar. - Page 7 During the heating process the heating screen displays. As long as １ 29 the power switch is not turned off during the heating period, this screen will remain. Do not move or open the DF-2 during the Heating Screen heating process. Do not lock the latches during treatment.
- Page 8 6. Should the device sense an abnormality during the heating process, the process will automatically stop and the cooling process will begin. An alarm will sound for 10 seconds to notify this change. To stop the alarm press the mode button. Error Screen An Error sign will show on the display screen.
-
Page 9: Flattening Procedure Chart
5. Flattening Procedure Flow Chart Power Switch On Start Screen 5 second 5 second Mode button on interval interval Standby Screen Mode button On ... -
Page 10: Specifications
Size: 445mm/17” W x 117mm/20” H x 547mm/7” D • Weight: 12kg/22lbs approx. Safe Usage Environment: Humidity 20% - 90% (No condensation) Temperature: 5C/41F – 35C/95F Manufactured for Furutech by ORB High End Systems of Japan ... - Page 11 12 months from date of consumer sale, Furutech will arrange for such defect to be rectified without charge provided that: The defect is not due to use of the product for other than...
- Page 12 MEMO ...
Need help?
Do you have a question about the DF-2 and is the answer not in the manual?
Questions and answers