Advertisement
Optional AUX input jack
This module has supports for a wired AUX. Any RCA cable will suffice, but if you
purchased our optional
AUX
cable, simply connect RCA plug to "AUX INPUT"
jacks on module and route AUDIO jack to the front of the dash or where AUX
jack will reside (within 3 ft.) Secure jack to dashboard, ensure mounting panel
is no thicker than 1/8" otherwise the threads won't protrude enough to engage
nut. (If necessary, use Dremel or sander to thin panel).
Pairing
Pairing process varies among devices but basic steps are the same. This
process is done upon initial install and should not have to be repeated.
1.
Turn ignition and radio "ON"
2. Move toggle switch (See Fig. 8) to "ON" position (if not already)
Bluetooth Settings
3. Open smart device
Scan (Search) for devices
4. Tap
5. Wait for Bluetooth device name to appear and tap
6. Connected is heard on car speakers
Bluetooth
and enable
.
Bluetooth operation
1.
Turn ignition and radio "ON"
2. Set radio to tuning frequently selected in step 5. (87.9 or 88.3)
Once frequency has been found, it is a good idea to store the frequency to
one of the radios presents buttons (e.g., preset #1)
3. Launch smart device streaming app.
4. Device should now be heard on car speakers otherwise ensure smart
device volume is at 95% or higher.
Note: To avoid noise, ensure volume on device is set 95% or more even if
radio volume is set low otherwise the radio will try to amplify a low-level
signal (noise)
5. Use radio volume control button to set playback level. If distorted, lower
volume on smart device.
:
Warning
Playlist and Track selection, text display are*NOT*
possible from radio. Use audio device built-in controls to access
and control audio files.
To listen to AUX device
a. Pause Bluetooth or disable Bluetooth on smart device
b. Connect audio device to AUX input
c. Place audio device in playback mode
d. Ensure AUX device volume is at 80% or higher
e. Use radio volume control button to set playback level. If distorted; lower
volume on AUX device
Notes:
1. Often times Bluetooth playback will be louder than AUX. As a precaution always
lower radio volume when switching between AUX and Bluetooth
2. If phone rings during streaming session; music is muted and call number
announced on car speakers. Take call on handset (this module does no support
hands-free calls). Once call ends, streaming resumes.
Advertisement
