Panasonic TC-19LX50 Operating Instructions Manual page 25

Programming the remote control code
You can operate other manufacturers' components using this TV's remote control.
Preparations:
+Connect the plug of the external component to the wall outbt.
+Make sure the component is turned off.
1
Press and hold POWER and
OK together, for at 1east 5
seconds=
+The mode selection buttons
flash, then release POWER
and OK.
_ Sebct the type of the component.
_ * The sebcted button lights and
all others go out.
_USE__STOP _I
ASPECT
TV/VCR VCR/DBS OH
TV
Enter the 3-digit infrared code
(see pages 26, 27).
+Factory default setting:
Panasonb
+ Press POWER to test the
operation+
Notes:
* if the component does not operate with the remote control, repeat
the procedure using another code. (Some brands have multiple
codes).
+ if an incorrect code is entered, or if the procedure takes longer
than 30 seconds, the programming wiii fail.
To find a code not tisted in the index
After step 2 above,
-- Press to select the code.
* The potential code is loaded for the device
selected in step 2.
+Press POWER button to test the operation.
, Repeat the steps untii the component code is
found, it may take many attempts before the
correct code is found.
Press to store the code.
25