Panasonic SX-MB100 Manual page 18

There are 150 different sounds permanently stored in this instrument to enhance your playing enjoyment.
ə This operation is not possible when the FM TUNER or BEAT MASTER mode is selected.
1.Press the SOUND button. Use the number buttons to
select a sound number (three digits).
• A SOUND list is printed on the control panel. For a
detailed list of the sounds, refer to the separate Ref-
erence Guide provided.
—— SOUND RHYTHM SELECT ——
50000
Ж, ООО
• Enter three digits to specify the sound. For example,
for sound number 003, press 0, 0, 3. Forsound number
030, press 0, 3, 0.
e The + and - buttons can be used to increase or
decrease the number. When a button is pressed and
held, the numbers change quickly.
e If you wish to cancel the number you are in the midst
of entering, press the + and - buttons at the same
time (CANCEL). If you pause in the midst of entering
a number, the entry may automatically be canceled
after a few seconds.
e The selected sound number and sound name are
shown on the display.
«Display example»
] Brand Fiano
( SOUND |
ШЇ со 8
2.Р!ау Ше keyboard.
e Non-pitched (percussion) sounds are also available.
18
QQTG0626
Touch
You can add dynamics to the sound by varying the key-
board touch.
• The initialized setting is ON.
=>Use the TOUCH button to switch between ON and
OFF.
TOUCH
О
• When set to on, TOUCH is shown on the display.
P TOUCH |
w TUNING
е This function is also effective in the BEAT MASTER
mode.
Pad Bank
The different types of phrases are classified into banks
in the PERFORMANCE PADS. When you switch to a
different bank, the phrase in each pad button changes.
NSO d
PERFORMANCE PAOS / BEAT MASTER
= Change to a different bank with the + and - buttons
beneath the pad buttons.
e A PADS BANK list is printed on the control panel.
• While you are selecting a different bank, the name of
the current bank is shown on the display.