Advertisement
1. GET SHIELD ON THE BKT R/L
2. INSERT LCD CABLE INTO PANEL
CONNECTOR
3. STICK 1*PCS YELLOW TAPE TO
FASTEN LCD CABLE
4. TRIM WIRES AND ASSEMBLE
SHIELDING IN RIGHT POSITION
1. LOCK 4*PCS SCREW(M3*6-T) TO
FASTEN PCB SHIELD
1.
INSERT BUTTON CABLE INTO BUTTON
2.
PUT THE SPEAKER AT THE
APPOINTED PLACE
3.
INSERT NETHER CCFT CABLE IN
INVERTER CABLE
- 32 -
Advertisement
