Summary of Contents for fothermo 1010-SWD-1600
- Page 1 PHOTOVOLTAIC EXCESS MANAGEMENT SYSTEM - SWITCHING DEVICE TECHNICAL DESCRIPTION AND INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS, WARRANTY CONDITIONS...
- Page 2 OPERATION ....................................6 MAINTENANCE AND REPAIR ..............................6 DISTURBANCES..................................6 ENVIRONMENTAL PROTECTION............................. 6 WARRANTY ....................................7 Contact/ Contact: fothermo System AG Phone: +49 (0) 7346 9649960 In the strong field 45b Email: contact@fothermo.com 89231 Neu-Ulm Registration court Ulm: HRB 739609Germany...
- Page 3 If the connected load is not compatible with the photovoltaic modules, the electrical loads can be destroyed. Connectable electrical loads Number of outputs for fothermo photovoltaic boiler Maximum power - output 1 Number of outputs for Micro PV inverters...
- Page 4 • The device must be installed in a dry place. energy. If a consumer does not consume power • Only one module per input may be connected to (anymore) (eg fothermo photovoltaic boiler has the limits specified in the specifications. reached the maximum temperature), the existing •...
- Page 5 At the first load IMPORTANT! The installation of PV modules may only output - output 1 - the fothermo photovoltaic boiler is be carried out by a competent person and must connected. For this purpose, the terminal with the exclude any risk to third parties.
- Page 6 The terminal block Out - is connected to the negative section above, Prioritization) of the outputs is terminal (-) of the device. maintained and the best possible use of the photovoltaic modules is ensured. This scenario is The Mirco PV inverter is connected to the load outputs indicated by the following image about the device, - Output 1 - and/ or - Output 2.
- Page 7 in normal household waste at the end of its service COMPLIANCE WITH THE REQUIREMENTS SPECIFIED life. It must be returned to a waste disposal centre IN THE MANUAL IS A PREREQUISITE FOR THE SAFE with special facilities for electrical or electronic OPERATION OF THE PURCHASED PRODUCT AND IS equipment.
Need help?
Do you have a question about the 1010-SWD-1600 and is the answer not in the manual?
Questions and answers