Summary of Contents for Safespaces Safespace
- Page 1 Safespace® Assembly Instructions 01706 816274 | info@safespaces.co.uk | www.safespaces.co.uk Safespaces, 361 Burnley Road, Todmorden, OL14 7DH Company Registration No. 5733564 | VAT No. 797 1269 81 Version 1.00 19/10/2020...
-
Page 2: List Of Materials
Version: 2023.2 LIST OF MATERIALS Item Quantity PVC Fabric (Anti - toe stubbing foam) Floor Foam Horizontal Bars (Short) Horizontal Bars (Long) Vertical Bars (Bottom bracket attached) - Page 3 Top Corner Mounting Brackets (M20 Nuts) Corner Foam Pads Foam Mattress Assembly Instructions - Safespace...
- Page 4 M8 45mm Hex Head Bolts M8 Nyloc Nuts M8 Washers M20 Washers Tools Required 1x 13mm Spanner 1x Power Drill with 13mm Socket Head Assembly Instructions - Safespace...
- Page 5 ASSEMBLY INSTRUCTIONS Safespace Position If possible, move and position the Safespace into the location where it is to be situated in the room i.e. door to door, window to window. Insert the Foam Floor Roll out the PVC fabric and position it with the floor facing up and mesh side facing...
- Page 6 Turn the Safespace over Once the floor is fully zipped up, turn the Safespace over so the mesh side is now facing up. Insert the Horizontal Bars Identify the 4x horizontal bars (Long) and 4x horizontal bars (Short). The long bars will be for the longer length sides and the shorter bars for the shorter length sides of the Safespace.
- Page 7 Repeat for all corners. Use the spanner to help align the bar with the bracket and then tighten all the nuts with a drill nut driver and then finally tighten with a 13 mm hand spanner. Assembly Instructions - Safespace...
- Page 8 Insert the Vertical Bars - This step requires 2 people Working in a pair, lift the Safespace up so that the threaded bar on the top corner brackets is easily accessible. (As demonstrated in the photo). Once the threaded bar is accessible, place an M20...
- Page 9 Repeat the same for all four corner brackets Securing to floor Floor Brackets The Safespace can be screwed to the floor with the four-floor brackets. Velcro The Safespace can be velcroed to the floor using velcro straps. Tension the PVC Feel the ‘slack’...
- Page 10 Repeat on all 4 corners. Attach the vertical bars Make sure all the zips of the doors and windows of the Safespace are closed. Then begin to wrap the velcro straps around the vertical bars, at first with only a small amount of tension.
- Page 11 Zip up the Corner Pockets Once you are satisfied with the tension and the positioning of the safespace is correct, zip up all the corner pockets.
- Page 12 Mattress - Only applicable if Safespace has a mattress Place the mattress into the Safespace, the position of the mattress will be shown on the plan. Your Safespace is now ready to use! Read user manual before use It is important to fully understand the content of the user manual before attempting to use the equipment.