Appearance And Buttons - Optex SAFARI 6D User Manual

APPEARANCE AND BUTTONS

1 Front HD LCD Screen (1.3")
2 Lens
3 Rear HD LCD Screen (2")
4 Busy Indicator
5 Charging Indicator
6 Power Indicator
7 Power/Mode Button
8 Shutter/OK Button
9 Battery Door
10 Battery
11 Speaker
12 Up / Down Buttons
13 USB-C Port
14 Micro SD Card Slot
15 Micro HDMI Port
1 2
4
5
6 8
7 10
12
11
OPERATING INSTRUCTIONS
1. Charge the Battery
Connect the camera to a computer or USB wall
3
charger for charging. The red Charging Indicator light
will turn on to indicate charging in progress. The light
will turn off when charging is complete. Ensure that
the battery is fully charged before use.
2. Using the Micro SD card
Push a Micro SD card into the slot until it clicks into
place. The label will face the back of the camera. To
remove the Micro SD card, press the tail of the card
9
inward softly and it will eject from the camera.
3. Power On/Off
13
Power On:
for 3 seconds, the screen will turn on and the
14
camera will be ready for use.
15
Power Off:
for 3 seconds, the camera will turn off.
4. Switching Between Modes
Video Recording
5. Busy Indicator Light
6. Front LCD Screen
Press and hold the Power/Mode button
Hold the Power/Mode button
The camera has 3 modes: video recording,
photography, and menu. After the power is on, press
the Power/Mode button to cycle between them.
Photography Menu
Mode Mode Mode
The Busy Indicator will be lit blue when the camera
is recording videos, shooting photos, etc.
Press and hold the WiFi/Down button while in
video recording, photography mode to switch
between front LCD screen and rear LCD screen.