Download Print this page
Ocean Matrix OMX-07HMHM0006 Operation Manual

Ocean Matrix OMX-07HMHM0006 Operation Manual

4k@60hz 4:4:4 hdmi 4x4 matrix & video wall controller with edid management

Advertisement

Quick Links

OMX-07HMHM0006
Ocean Matrix 4K@60Hz 4:4:4 HDMI 4x4
Matrix & Video Wall Controller with EDID
Management

Advertisement

loading

Summary of Contents for Ocean Matrix OMX-07HMHM0006

  • Page 1 OMX-07HMHM0006 Ocean Matrix 4K@60Hz 4:4:4 HDMI 4x4 Matrix & Video Wall Controller with EDID Management...
  • Page 2: Specifications

    Description: The Ocean Matrix OMX-07HMHM0006 is an HDMI 4x4 matrix and video wall controller that supports up to 4K@60Hz 4:4:4 resolutions. The unit can function as a 4x4 seamless matrix switcher and also supports ten video wall modes. The OMX-07HMHM0006 also features a web browser interface module for control and configuration of the matrix when used as a stand-alone unit or with a third party control system.
  • Page 3 Item Includes: 1 x OMX-07HMHM0006 1 x Matrix IR Remote 1 x 3pin-3.81mm Phoenix Connector (male) 1 x 20-60KHz IR Wideband Receiver Cable (1.5 meters) 2 x Mounting Ears 4 x Machine Screws (KM3*4) 1 x 12V/2.5A Locking Power Adapter...
  • Page 4 Operation Controls and Functions: Rear: Name Function description The link port for TCP/IP control, connected to an active Ethernet link with an TCP/IP RJ45 cable to control the Matrix via Web RS-232 serial command control port, connect to a PC or control system to RS-232 control the Matrix If the IR receiver window of the unit is blocked or the unit is installed in a...
  • Page 5 Operation Controls and Functions: Remote: Name Power on or Standby Power on the matrix or set it to standby mode Info Press this button to display the serial port baud rate and IP address in the upper right corner of the screen Input 1/2/3/4: Select the signal output channel <...
  • Page 6: Operation Controls And Functions

    Operation Controls and Functions:...
  • Page 7: Product Service

    PRODUCT SERVICE Damage requiring service: The unit should be serviced by qualified service personnel if: (a) The DC power supply cord or AC adaptor has been damaged (b) Objects or liquids have gotten into the unit (c) The unit has been exposed to rain (d) The unit does not operate normally or exhibits a marked change in performance;...