Do you have a question about the SM8551 and is the answer not in the manual?
Questions and answers
Summary of Contents for Metagenics Fitness SM8551
Page 1
Metagenics Fitness LED console operation manual SM8551CONSOLE INSTRUCTION ITEM DATE 2023/10/17 MANUALV10 一、 Display Description : (1).LED FULL DISPLAY 二、 Function specifications : : DISPLAY FUNCTION RANGE Function Display Set Range Setting Unit Notes Name Range TIME 00:00~99:59 00:00~99:00 Input with keys...
Page 2
( INTERVAL): Three groups of interval training program selection, two groups of presets, and one group of user settings. ( Watt Constant): Manual setting,set Watts to train, and TIME can be set. ( Watt Program): Six groups of WATT PROGRAM selection,and TIME can be set. ( H.R.C.
Page 3
QUICK KEY DESCRIPTION : :Quickly switch to the Manual setting function(when the exercise mode is not confirmed). :Quickly switch to the Program setting function(when the exercise mode is not confirmed). :Quickly switch to the Calorie Program setting function(when the exercise mode is not confirmed).
Page 4
(picture 3) (picture 4) (picture 5) 3. Press function quick key to switch to mode menu or operate LOAD(+/-) to select exercise mode; the sequence of exercise mode is Manual Start(Picture 6)> Program(Picture 7) > Calorie Program (Picture 8) > Heart Rate(Picture 9) >...
Page 5
(picture 12) 4. Manual: Directly on the homepage or exercise mode menu, press the key to start exercise directly in Manual. On the home page or in exercise mode menu, operate LOAD(+/-)to the Manual menu(Picture6),press the key or directly press the key to enter target setting,set the TIME、CAL、DIST、PULSE (Picture 13 -Picture 16)in sequence, press the key to set it.
Page 6
(picture 17) (picture 18) (picture 19) (picture 20) (picture 21) (picture 22) (picture 23) (picture 24) 5. Program: On the homepage or exercise mode menu , operate LOAD(+/-)to the Program menu(picture 25) , press the key or directly press the key to enter the Program mode, and their are 20 graphics to choose form in this mode(the unconfirmed function word flashing;Picture 26-P1/Picture 27-P2),When the keys are...
Page 7
and then press the key to start the exercise(picture 29~30). During the exercise, the SPEE/TIME/CAL cycle switches with RPM/DIST/WATT every 3 seconds, and the LOAD changes with the dot matrix during the exercise. Press the keys to adjust the LOAD. When there is a change in LOAD, immediately skip to the LOAD display.
Page 8
one cycle,the average RPM/WATT/PULSE/SPEED will be displayed in a running light mode. Each item value needs to be displayed for 3 seconds. After two cycles of display, return to the exercise mode menu, or press the key to immediately return to the exercise mode menu. Under the display of average exercise data, press the key to start exercising again.
Page 9
a running light mode. Each item value needs to be displayed for 3 seconds. After two cycles of display, return to the exercise mode menu, or press key to immediately return to the exercise mode menu. Under the display of average exercise data, press the key to start exercising again.
Page 10
Press the key to confirm the graphics and enter the TIME setting[preset 20 minutes(picture 48), range: 0-99 minutes], the value is set with the key,and the function value flashes during the setting process. After the setting is completed, press the key to confirm,and then press the key to confirm the value.
Page 11
value of this function flashes. After the setting is completed, press the key to confirm, and then press the key to enter the TIME setting(picture 53), the value is set with the key. During the setting process, the value of this function flashes. After setting, press the key to confirm, and then press the key to confirm the value.
Page 12
the three graphics will cycle display(I1(preset mode 1)> I 2(preset mode 2)>>I3(user set) >I1). Note that I3 needs to be set completely(preset IMPLEMENT 5 seconds/ REST 5 seconds/ CIRCLE 1 time),and set with key to start exercise. After confirming the three kinds of intermittent modes with key, the prompt for (IMPLEMENT)executing seconds/(REST)rest seconds/(CIRCLE)and cycling cycles(picture 58~60) will be displayed in cycles.
Page 13
PROGRAM GRAPH: 2. Calories Program graph : After completing the vertical total CAL, progress to the next grid. 3. Watt Training PROGRAM:...
Page 14
4. Intermittent Description : There are three modes of target(I1~I3),I1~I2 for the program preset target,I3 for the user set. After the three modes start to exercise ,LOAD can only be adjusted from the IMPLEMENT mode LOAD to the preset, and cannot be adjusted below the preset.
Page 15
cycles. (3). Intermittent 3 : Custom mode, which allows for customization of the IMPLEMENT high intensity/REST/loop settings. At Intermittent 3, when pressing the MODE button to confirm,set the IMPLEMENT high intensity/REST/CIRCLE cycle in sequence, which can be set repeatedly.The setting is also set using the key,with the preset IMPLEMENT 5 seconds/REST 5 seconds/CIRCLE 1 cycle.
Need help?
Do you have a question about the SM8551 and is the answer not in the manual?
Questions and answers