SUMMARY IMPORTANT SAFETY RECOMMENDATIONS Important safety recommendations p. 5 ......................Before first use p. 8 ....................................PREPARATION Which water should I use? p. 9 ............................. Filling the water tank p. 9 ................................Adjusting the temperature and steam p. 10 ...................... Dry ironing p.
PREPARATION WhichwatershouldIuse? • Your appliance was designed to operate using untreated tap water. However, it is necessary to periodically clean the steam chamber to remove any mineral deposits. • Do not use pure demineralised or pure distilled water, water from clothes dryers, scented or softened water, rain water, filtered, bottled or boiled water, water from refrigerators, batteries or air conditioners, pure distilled water or rain water as these may damage the iron.
• Plug in the appliance. Adjustingthetemperatureandsteam • Set the steam control to • Set the slider on the "normal" or "eco" setting. • The Smart Technology of your iron provides one optimum combination of temperature and steam output to iron all types of fabrics. In normal conditions of use, with the normal or eco settings, you can iron all the fabric types shown in the pictograms above, e.g.
Dryironing • Set the steam control to • You may continue to iron when the indicator light turns off. Gettingmoresteam • Set the slider on the "normal" or "eco" setting. sec. • Press the turbo steam button periodically (turbo steam). •...
Verticalsteamironing • Set the thermostat control to “Normal” sec. • Press the turbo steam button (turbo steam) in pulses, moving the iron from top to bottom. • Hold the iron at a distance of a few centimetres from the clothing to avoid burning delicate fabrics. •...
Dampeningclothing(Spray) • When dry or steam ironing, press repeatedly on the spray button to moisten clothing and remove stubborn creases. • Ensure that there is water in the tank before using the spray button. Whileironing • Do not lay the iron down on the soleplate; use the heel rest for this purpose.
IRON STORAGE AND MAINTENANCE Storingyouriron • Unplug the iron and wait for the soleplate to cool (approx. 1 hour). • Empty the water tank. • Set the steam control to • Wrap the cord around the bottom of the iron's body. Store the iron on its heel rest.
Cleaningtheanti-calcvalve(oncepermonth) • Unplug your iron and empty the water tank. • To remove the anti-calc valve, open the water tank cover and pull on the valve near the steam control. • Soak the valve for 4 hours in a glass of water with lemon juice.
Descalingthesteamchamber(oncepermonth) Max. • Allow your iron to heat up with a full water tank while on its heel rest and with the thermostat control set to normal. • Once the indicator light turns off, unplug the iron and place it over a sink. •...
• Unplug your iron and, once cooled, wipe it with a soft cloth. • Never use chemical or abrasive products. During the next use, turn on your iron in a horizontal position without putting it into contact with your laundry in order to eliminate any water containing mineral residues that remain in the soleplate.
IS THERE A PROBLEM WITH YOUR IRON? PROBLEMS POSSIBLE CAUSES SOLUTIONS Water is leaking You are using the steam Wait for the indicator light to turn from the holes in when the iron is not hot off. the soleplate. enough. You are using the turbo Wait a few seconds between each steam button (turbo steam)
IS THERE A PROBLEM WITH YOUR IRON? PROBLEMS POSSIBLE CAUSES SOLUTIONS Your iron The water tank is empty. Fill it up. produces little to The anti-calc valve is dirty. Clean the anti-calc valve. no steam. Your iron is clogged up with Clean the anti-calc valve and steam limescale.
Need help?
Do you have a question about the SMART PROTECT and is the answer not in the manual?
Questions and answers