2.2.4. Modbus Setup---------------------------------------------------------Page7 2.2.5 Reset Button-------------------------------------------------------------Page8 This document is proprietary to MaxLong Corporation. Use or disclosure of the document, or the information contained therein, for any purposes other than MaxLong purposes is NOT permitted without prior written authorization by MaxLong...
Slave ,TCP to RTU Slave , TCP to ASCII Slave Mode, and it also supports manual configuration via web browser. This document is proprietary to MaxLong Corporation. Use or disclosure of the document, or the information contained therein, for any purposes other than MaxLong purposes is NOT permitted without prior written...
RS485 RS232 Figure 1 Product View This document is proprietary to MaxLong Corporation. Use or disclosure of the document, or the information contained therein, for any purposes other than MaxLong purposes is NOT permitted without prior written authorization by MaxLong...
Step4➔And now you have successfully connected to this Modbus gateway This document is proprietary to MaxLong Corporation. Use or disclosure of the document, or the information contained therein, for any purposes other than MaxLong purposes is NOT permitted without prior written...
System Status: Display current status and time of the system This document is proprietary to MaxLong Corporation. Use or disclosure of the document, or the information contained therein, for any purposes other than MaxLong purposes is NOT permitted without prior written...
6. DHCP Client : Network configuration information automatically acquired,default value is “Disable” This document is proprietary to MaxLong Corporation. Use or disclosure of the document, or the information contained therein, for any purposes other than MaxLong purposes is NOT permitted without prior written...
RS485, RS422 b. Baud Rate: 960,19200 bps, and etc. This document is proprietary to MaxLong Corporation. Use or disclosure of the document, or the information contained therein, for any purposes other than MaxLong purposes is NOT permitted without prior written...
TCP Slave: Port can be specified, if not specified will use the default value This document is proprietary to MaxLong Corporation. Use or disclosure of the document, or the information contained therein, for any purposes other than MaxLong purposes is NOT permitted without prior written...
The Device will reboot and all the parameters will be reset to the factory default. This document is proprietary to MaxLong Corporation. Use or disclosure of the document, or the information contained therein, for any purposes other than MaxLong purposes is NOT permitted without prior written...
Need help?
Do you have a question about the MG8322 and is the answer not in the manual?
Questions and answers