Trouble Shooting - Nobu NB0610W User Manual

MAINTENANCE MAINTENANCE

Trouble Shooting

Trouble Shooting
Whenever there is a problem with the appliance, check if you can solve it following Whenever there is a problem with the appliance, check if you can solve it following
the tables below. If the problem persists, please contact the customer service. the tables below. If the problem persists, please contact the customer service.
Description Description
Appliance does Appliance does
not start not start
Door can´t be Door can´t be
opened opened
Water leakage Water leakage
Detergent residues Detergent residues
in the detergent in the detergent
dispenser dispenser
Indicator or display Indicator or display
does not work does not work
Abnormal noise Abnormal noise
Error Codes Error Codes
Description
Description
Possible cause Possible cause
Door is not closed properly. Door is not closed properly.
Clothes are stuck. Clothes are stuck.
Safety protection Safety protection
is activated. is activated.
Connections are Connections are
not tight enough. not tight enough.
Detergent is damp Detergent is damp
and/or clotted. and/or clotted.
PC board or harness have PC board or harness have
connection problems. connection problems.
Fixing bolts still in place. Fixing bolts still in place.
Floor is not solid or level. Floor is not solid or level.
Reason
Possible cause
Door is not closed properly
Door is not closed properly
Water injecting
problem during
Water injecting
wash cycle.
problem while
washing
Overtime water draining
Water overflow
Overtime water draining
Water overflow
Others
Others
Solution Solution
Close the door properly and Close the door properly and
restart. restart.
Check the laundry. Check the laundry.
Disconnect the power and Disconnect the power and
restart. restart.
Check and fasten the water inlet Check and fasten the water inlet
pipe. pipe.
Check and clean the outlet hose. Check and clean the outlet hose.
Clean and wipe the detergent Clean and wipe the detergent
dispenser dry. dispenser dry.
Switch off the power and check Switch off the power and check
if the mains plug is connected if the mains plug is connected
properly. properly.
Check if the fixing bolts have Check if the fixing bolts have
been removed been removed
Make sure the appliance is Make sure the appliance is
installed on a solid and level installed on a solid and level
floor. floor.
Solution
Solution
Close the door properly and
restart.
Restart after the door is closed
Check if the water pressure
Check if the clothes is stuck
is high enough.
Check if the water pressure is
Straighten the water pipe.
too low
Clean the inlet valve filter.
Straighten the water pipe
Check the drain hose for blockage.
Check if the inlet valve filter is blocked
Restart the appliance.
Check if the drain hose is blocked
Restart the appliance. If problem
Restart the washer
persists, please contact the
Please try again first, call up
customer service.
service line if there are still troubles
32
39