About this product PROLYTE trusses are structural elements designed to be repeatedly assembled and disassembled to carry loads in temporary or permanent installations. Depending on the application, PROLYTE trusses can be referred to as lifting accessories or construction products.
See PROLYTE Trusses User Manual, Part 1: General instructions. 2 Safety Before working with the product, see the section Safety in PROLYTE Trusses User Manual, Part 1: General instructions. Read the Safety information carefully and pay attention to the information provided.
89.88 42.45 Table 2: Design values of resistances 4 Transport, handling and storage See PROLYTE Trusses User Manual, Part 1: General instructions. 5 Identification See PROLYTE Trusses User Manual, Part 1: General instructions. Page 7 of 10 DN00176 Issue 1...
7 Load capacity In addition to the information and instructions provided in PROLYTE Trusses User Manual, Part 1: General instructions, the truss loads shall never exceed the values stated in the load tables below. Page 9 of 10 DN00176 Issue 1...
8 Approved accessories For a complete overview of approved accessories, see our brochures or www.prolyte.com. By using excessive force when tightening accessories such as lamp hooks or cell clamps, you may cause damage to the truss chords. Pay special attention when using lamp hooks or cell clamps. Their inside radius may not meet the tube they need to be attached to.
Need help?
Do you have a question about the B100RV Truss and is the answer not in the manual?
Questions and answers