maxfun 10 Pro Manual page 10

Install handlebars
The first step is to remove 4 screws
1
in order to install the handlebar of
the electric scooter.
Put on the handle of the electric
2
scooter, then align the mounting
module with the four screw holes, and
press the module.
Press and hold the installation
3
module, and screw the four screw
holes to the right respectively, don't tight-
en it, just hang it.
Finally, tighten the screws on the four
4
screw holes to the right to ensure that
the handle is installed securely.
1
3
2
4 4