Advertisement
[Error in Dispiav)
The aperture displayed may be one-half f/
stcH> off the one selected on the flash. This
is because the aperture display is in one-
half f/stop increments; it has no effect on
actual exposure The aperture display may
also flash on and off if the flash-selected
aperture is the same as the lens' maximum
aperture. In this case, exposure will be cor¬
rect, but it is advisable to check the flash-
selected aperture to make sure it is not
larger than the lens' maximum aperture.
AE-1 PROGRAM Display
Full Autoflash Mode: FD lens on "A" and
shutter speed selector dial not on "B."
•
The aperture selected on the
flash ar>d the "[Jf' mark in-
dicatir^ the flash ts charged
will be displayed. After the
shutter is released, the
mark will flash on and off for
two seconds provided you
continue to press the shutter
button hallway and the sub¬
ject
was within
the
auto
shooting distance range.
Automatic
Shutter
Setting
Autoflash
Mode: FD lens off "A" or FL lens.
•
glows in addition to the above-
mentioned displays
If.
however, the
auto-exposure
confirmation
mark
flashes on and off in this mode, it does
not confirm auto-exposure and should
be disregarded.
Note; The aperture display may flash on
and off in both modes if the flash-
selected aperture is the same as the
lens' maximum aperture. In this case,
exposure will be correct.
Advertisement
