Philips 32PW9713 - annexe 1 Manual page 26

26
Record with a video recorder with EasyLink
If you have connected a S-VHS video recorder provided with the EasyLink function,
you can record S-VHS-quality from a S-VHS peripheral connected to the right side of
the TV. (E.g. from a S-VHS camcorder.)
In TV mode, it is possible to start a direct recording of the programme which is being
displayed on the TV screen.
•
Press at the same time the
control.
The video recorder switches on when it was in standby and a message of what is
being recorded appears at the bottom of the screen.
The video recorder starts recording the programme that appears on the screen.
•
Press the ‡a key to stop the recording.
When recording a programme from a peripheral connected to
, you can not select another TV programme on the screen.
FRONT
To watch TV programmes again, press the programme number you want to select.
twice. Then the recording is stopped and your video recorder switches to standby.
If you switch to standby during recording a programme from a peripheral connected
to
EXTERNAL 1, 3
you are still recording. The blinking stops after the recording is finished.
Record with a video recorder with
If your video recorder is equipped with
programmes to be recorded automatically in the NexTView mode, it is not necessary
that the TV is in the standby mode or switched on for the recording to start.
key on the left side and the ®M key of the remote
VCR
or , the blinking red lamp on the front of your TV indicates that
FRONT
TV
NEX
EXTERNAL 1, 3
TV
NEX IEW
Link, and you tagged one or more
IEW
or
Link