Download  Print this page

Automatic Installation; Manual Installation - PHILIPS 32PW9523 - annexe 1 Manual

Hide thumbs
Also See for 32PW9523 - annexe 1
- 19 pages
Manual - 20 pages
Manual - 28 pages

Advertisement

Automatic Installation

Start
Stop
J
Stop
K
TV is searching
One moment please ...
Automatic Installation
J
Start
Start
K
Stop
1 BBC1
2 BBC2
3 CNN
....
....

Manual Installation

(Selection Mode)
J
K
System
System
Programme No.
Search
Store
Automatic installation
In the Automatic Installation menu select Start and press the OK key in the
centre of the cursor to activate the searching. All TV channels are searched for
and stored automatically.
If a cable system which broadcasts ACI (Automatic Channel Installation) or a
TV channel transmitting a teletext page with the frequencies and programme
names of all the TV channels which can be received, is detected, the search is
stopped and a programme list appears.
The programme list is automatically filled with all the programme numbers and
names of the TV channels transmitted.
It is possible that the cable company or the TV channel displays a broadcast selection
menu. Layout and items are defined by the cable company or the TV channel.
Make your choice with the cursor up/down, left/right and press the OK key in the
centre of the cursor.
To exit from the menu
Press the red ® key on the remote control.
Go on to page 6.
Manual installation
Searching for and storing TV channels is done channel by channel.
You must go through every step of the Manual Installation menu.
Selection Mode is only present and lights up if the country you selected also
offers the channel option (C-channels for aerial channels, S-channels for cable
channels).
You can choose either channel or frequency mode.
& Select the TV system
Select the country or part of the world from where you want to receive the
TV channel.
If you are connected to a cable system, select your country.
é Enter the programme number with the digit keys.
" Search for a TV channel
The frequency or the channel number increases until a TV channel is found.
In case of poor reception, you can improve the reception by adjusting the
frequency with the - P + key.
Direct selection of a TV channel
If you know the frequency, or the C- or S-channel number, enter it directly
with the digit keys 0 to 9.
Ask for a list from your cable company or dealer, alternatively consult the
Table of frequencies on the inside backcover of this handbook.
' Store steps & till "
Select Store and press the OK key in the centre of the cursor.
Repeat every step to store another TV channel.
To exit from the menu :
Press the red ® key on the remote control.
5

Advertisement

Table of Contents

   Also See for PHILIPS 32PW9523 - annexe 1

This manual is also suitable for:

32pw953432pw954432pw9544-05r

Comments to this Manuals

Symbols: 0
Latest comments: