Aeromotive AN-10 Installation Instructions

This product is not legal for sale or use on emission-controlled vehicles except when used as a direct
replacement part matching OEM specification.
potential ignition sources. Extinguish all open flames, prohibit smoking and
eliminate all sources of ignition in the area of the vehicle and workspace before
proceeding with the installation. Ensure you are working in a well ventilated area
with an approved fire extinguisher nearby.
Installation of this product requires modification to a fuel tank/ the fuel
system, failure to satisfy all safety considerations will result in fire, explosion,
injury and/or loss of life to yourself and/or others. All fuel system components
MUST be located as far from heat sources as possible, like exhaust, engine block,
etc.
due to incorrect maneuvering or technical errors. A falling object can cause
injury and/or loss of life to yourself and/or others. When working under the
vehicle, always use stands, and ensure that the ground or floor is stable and
level. Never crawl under a vehicle which is only supported by a jack.
pressure has been relieved. Refer to the appropriate vehicle service manual for
the procedure and precautions for relieving the fuel system pressure
appropriate safety appeal. A drilling operation will cause flying metal chips. Flying
metal chips can cause eye injury.
Installation of this product requires detailed knowledge of automotive systems
and repair procedures. We recommend that this installation be carried out by a
qualified automotive technician. Careless installation of this product can result in
damage to the product, injury or loss of life to yourself and/or others.
AN-10 100 micron Fuel Cell Filter Element
Always be aware of flammable situations. Drilling and grinding can be
Mechanical and hydraulic lifting devices can tip over or lower accidentally
The fuel system is under pressure. Do not open the fuel system until the
When installing this product always wear safety glasses and other
AEROMOTIVE
Part # 12606
INSTALLATION INSTRUCTIONS
WARNING!
WARNING!
WARNING!
WARNING!
CAUTION!
CAUTION:
.