Download Print this page
Safavieh Furniture Ceu NST9604 Manual

Safavieh Furniture Ceu NST9604 Manual

Product dimensions: 16”wx15”dx22”h

Advertisement

Quick Links

NOTICE
*Please make sure that you have all parts indicated and they are in good condi�on before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a so� surface to prevent scratching the finish during
assembly.
*This item may require periodic �ghtening.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email customersupport@safavieh.com
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
*If any part is missing or damaged, do not a�empt to assemble the product.
*Es�mated Assembly Time: 60 minutes.
*Tools Required for Assembly (included): Allen Key
CARE AND MAINTENANCE
Always use felt pads under all ar�cles to prevent discolorra�on or so�tening of the lacquer.
Plas�c and rubber bases on items can discolor wood. Wipe up spills immediately and avoid
common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done
with a so� lint free co�on cloth dampened with water or furniture polish. On highly used surfaces
we recommend applying a quality paste wax shich should be used on a reguler basis to provide
addi�onal protec�on from scratches and spills. How o�en you apply the wax depends on how
much wear the furniture receives.
Part List
F
H
E
I
A
J
C
B
G
LS20B1
K
L
L
LS20B1
K
LS20B1
Model# NST9604
Product Dimensions: 16"Wx15"Dx22"H
D
LS20B1
WARNING :
WEIGHT CAPACITY:22 LBS.
DRAWER LOAD CAPACITY : 15.4 LBS.

Advertisement

loading

Summary of Contents for Safavieh Furniture Ceu NST9604

  • Page 1 NOTICE *Please make sure that you have all parts indicated and they are in good condi�on before you begin assembly of this item. Refer to part list and hardware list below for guidance. *This item should be assembled on a so� surface to prevent scratching the finish during assembly.
  • Page 2: Hardware List

    Hardware List HW1x12 HW2x12 HW3x4 HW4x4 HW5x16 HW6x2 Ø 8 x 30 mm Ø 6 x 30 mm Ø 6 x 35 mm Ø 15 mm Ø 12 mm Ø 6 x 32 mm HW7x2 HW8x4 HW9x4 HW10x6 HW11x1 HW12x4 M 4 x 12 mm M 6 x 10.5 mm M 8 x 39 mm...
  • Page 3 Part List & HW For Mul�-Box Items Piece Descrip�on Carton Call Piece Descrip�on Carton Call Top Board 1 of 1 Cambolt Big 1 of 1 1 of 1 1 of 1 Bo�om Board CamLock Big Side Board Le� 1 of 1 1 of 1 CamLock Small Side Board Right...
  • Page 4 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list. If any part is missing or damaged, do not a�empt to assemble the product. Es�mated Assembly Time: 45 minutes. STEP1: Insert Cambolt Small (HW4) into Front Drawer (E).
  • Page 5 RM35A RM35A STEP6: Insert Dowel Big (HW5) into Side Board Le� (C) and STEP5: Insert Cambolt Big (HW1) into Top Board (A). Side Board Right (D). Con�nue with securing part of the metal runner (HW RM35A ) into posi�on as the above image, using screw M6x10.5mm (HW8). Laminated STEP8: Insert Back Board (J) then Bo�om Board (B) faling front, secure STEP7: A�ach Side Board Le�...
  • Page 6 BC410 ±2 mm STEP10: Now let’s combine the bo�om skirt. Start with installing STEP9: Insert Cambolt Big (HW1)into Bo�om Board (B). Corner Brace (HW BC410) into Bo�om Skirt 2 (L) using Screw M4x16 (HW14).Do not over�ght screw yet,leave around 2mm gap. ±2 mm ±2 mm STEP11: Combine components from step 10 with...
  • Page 7 STEP13: Insert Dowel Big (HW5) into assembled bo�om skirt. STEP14: Bring the assembled bo�om skirt and insert into Bo�om Board of the Night Stand .Secure with Camlock Big (HW2) then �ghten using screwdriver. LS20B1 LS20B1 STEP15: Remove plas�c cap from Legs. Insert the bolt of the Leg (LS20B1) into hole of STEP16: Hold the sides of drawer, posi�on the wheel of rail at drawer back and the wheel of rail at side boards, according to the image.
  • Page 8 TIPPING RESTRAINTS KIT INSTALLATION GUIDANCE Different wall materials require unique wall fasteners. The wall plugs (AA2) and screws (AA3) are designed for fixing to concrete walls only. Please consult your local hardware store to ensure you are using the correct hardware for your wall type. AA1 x 2 AA2 x 4 AA3 x 4...

This manual is also suitable for:

Ceu nst9604bCeu nst9604eCeu nst9604aCeu nst9604d