ACV EVO S Series Instructions Manual

Grundfos upmxxl 25-120 pump control

Advertisement

Quick Links

EVO S
03/2023
UIN 236075 A01
Grundfos UPMXXL 25-120
Pump Control
Instructions
When
replacing
any
part
on
appliance, use only spare parts that you
can be assured conform to the safety
and performance specification that we
require. Do not use reconditioned or
copy parts that have not been clearly
authorised by ACV.
For the very latest copy of literature for
specification and maintenance practices
visit
our
website
www/acv/com/gb
where you can download the relevant
information in PDF format.
this

Advertisement

Table of Contents
loading

Summary of Contents for ACV EVO S Series

  • Page 1 Do not use reconditioned or copy parts that have not been clearly authorised by ACV. For the very latest copy of literature for specification and maintenance practices visit...
  • Page 3: Table Of Contents

    CONTENTS Section 1 - General ...................2 Introduction .................2 Contents ..................2 Section 2 - Installation ................3 Preparation .................3 Installation...................3 2.3 Pump configuration ..............4 Pump performance ..............4 2.5 Pump parameter settings ............5 ACV UK Ltd Evo S 236075 A01...
  • Page 4: Section 1 - General

    Section 1 - General INTRODUCTION Table 1 - Evo S from ACV This kit is suitable for the following boilers: Evo S Boiler Size Evo S range of boilers utilising the Grundfos UPMXXL Evo S 25-120 pump. Evo S Evo S...
  • Page 5: Section 2 - Installation

    Gas Safe technical bulletin 118. All work must be carried out by a competent person. 2. For access to the control box (refer to manual ACV Evo S INSTALLATION, COMMISSIONING AND SERVICING INSTRUCTIONS Frame 4.6.1).
  • Page 6: Pump Configuration

    Settings 6085 Function output P1 Boiler pump Q1 6086 Signal logic output P1 Inverted PUMP PERFORMANCE For pump performance refer to Figure 2 below. Figure 2 - UPMXXL pump performance curve (Blue line) ACV UK Ltd Evo S 236075 A01...
  • Page 7: Pump Parameter Settings

    69.3 2505 Threshold flowDetect 35.0 2322 Pump speed min 38.3 2323 Pump speed max 71.7 2505 Threshold flowDetect 35.0 2322 Pump speed min 50.0 2323 Pump speed max 86.0 2505 Threshold flowDetect 45.8 ACV UK Ltd Evo S 236075 A01...
  • Page 8 69.3 2505 Threshold flowDetect 35.0 2322 Pump speed min 38.3 2323 Pump speed max 71.7 2505 Threshold flowDetect 35.0 2322 Pump speed min 50.0 2323 Pump speed max 86.0 2505 Threshold flowDetect 45.8 ACV UK Ltd Evo S 236075 A01...
  • Page 9 HMI under ‘Diagnostics heat generation’ 8366, also by pressing the ‘I’ information button. The value is shown in l/m. So final adjustments can be made to ensure compliance. ACV UK Ltd Evo S 236075 A01...
  • Page 10 Notes ACV UK Ltd Evo S 236075 A01...
  • Page 11 Notes ACV UK Ltd Evo S 236075 A01...
  • Page 12 St. David’s Business Park, Dalgety Bay Fife, Scotland KY11 9PF Tel: 0044 (0)1383 820100 www.acv.com/gb ACV pursues a policy of continuing improvement in the design and performance of its products. The right is therefore reserved to vary specification without notice.

This manual is also suitable for:

Evo s 40Evo s 60Evo s 70Evo s 80Evo s 100Evo s 120

Table of Contents