Precision POWER PP36L-12U User Manual

PRECISION POWER, LLC
A PRECISION GROUP COMPANY
P: +1-888-619-1651
E: sales@goprecisiongroup.com
Website: www.GoPrecisionGroup.com
Review the following important safety warnings to avoid bodily injury or
damage to equipment during installation or operation of this device. Read
ALL instructions before attempting to install or operate this device.
This device is intended for indoor use only. To prevent the risk
!
of fire or electrical shock, install in dry location free from damp or
wet environment, or potentially damp or wet environment.
Adhere to all acceptable operating environment limitations as
!
listed to prevent the risk of fire or electrical shock (see user
specifications within User's Manual)
Risk of fire or explosion if improper battery is installed and
!
attempted to operate within this device. Device is rated and
approved for use with. Follow User Manual instructions for
proper installation of battery. Dispose of used batteries in
accordance to battery manufacturer specifications.
!
NO user-replaceable parts within this device except the battery.
Do not remove cover unless you are installing, replacing, or
servicing the battery.
!
Keep Out of reach of children.
! If you experience problems with the device, discontinue use and
unplud from the AC socket. Call your provider for assistance.
FCC NOTICE
This equipment has been tested and found to comply with the
limit for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with these instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by tuning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures: (1) Reorient or relocate the receiving
antenna. (2) Increase the separation between the equipment
and receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. (4)
Consult the dealer or an experienced radio/TV technician for
help.
CAUTION: Any changes or modifications could void the
authority granted by the FCC to operate this equipment.
NOTE: Precision Power reserves the right to change or correct
the contents of this document and does not assume any
responsiblity for ommissions or errors.
REV 01-03-2023
4
WARNING
Model # PP36L-12U
User's Manual
MICRO UPS INTRODUCTION
MICRO UPS is designed and intended for use as a
Desktop or Wall-Mount uniterruptable 12Vdc power supply
and battery backup device for 12Vdc CPE Equipment
(i.e. ONT, Router, Access Point). The MICRO UPS not
only provides constant supply of DC power during normal
operating conditions, but offers battery backup power in
case of electrical power outage.
CONTENTS OF DESKTOP PRO PACKAGE
NOTE: Please verify all standard contents are accounted
for upon receipt of Micro UPS.
STANDARD: (1) Power Supply/Charger; (1) Li Ion Battery
Pack; (1) AC Power Cord; (1) 7-Pin Connector; (1) User's
Manual; (1) Wall Mount Plate
Optional: (1) Universal Wall Mount Enclosure w/ Cover.
REV 01-03-2023 1