Sharper Image SPASTUDIO Quick Start Manual page 2

CONTENTS
• SPASTUDIO Towel Warmer
™
• Diffuser disc (x3)
04
Press the power button located on the front of the
towel warmer.
The power button will illuminate when activated.
The LEDs underneath the towel warmer will glow
blue when warming is started and they will glow
red after 10 minutes.
05
Wait 10 – 15 minutes for the towels to warm. Towels
will continue warming for up to 45 minutes and then
the towel warmer will automatically power off.
06
When ready for your hot towel, gently press down
on the lid until it pops up and then lift the rest of the
way.
Carefully remove your towel and wrap yourself in
spa-like bliss.
01
Unwrap the cord on the bottom of the towel
warmer to the necessary length and lock cord in
place.
Plug the cord into a grounded wall outlet.
02
Gently press down on the front of the lid to make it
pop up and then lift the lid until fully open.
IMPORTANT: Do not force the lid open past its
normal range. Doing so could cause product
damage.
03
Fill the interior of the towel warmer with up to 3
bath towels, 2 bath sheets or 1 bathrobe.
Close the lid and press down gently until secured.
TIP: For faster warming, unfold or unroll towels
before placing in the towel warmer. For fastest
warming, heat a single towel at a time by draping it
over the center divider.
STANDBY AND OFF
If the lid is lifted during heating, the towel warmer
will enter standby mode (the power button will
flash).
To turn off the towel warmer, press and hold the
power button.
After use, always leave the lid open.
Allow towel warmer to cool down completely and
then wipe away any interior condensation.
AROMATHERAPY OPTIONAL
Locate the diffuser basket inside the towel warmer
and remove it by twisting it counterclockwise.
Add several drops of your preferred essential oil
(not included) to a diffuser disc (included).
Insert the diffuser disc into the diffuser basket and
reattach to the interior of the towel warmer.
Use the towel warmer as normal.