Table of Contents
Advertisement
Spin
• Spin speed level can be selected by pressing
the Spin button repeatedly.
• Spin Only
1
Press the Power button.
2
Press the Spin button to select RPM.
3
Press the Start/Pause button.
NOTE
• When you select No, it will still rotate for a
short time to drain quickly.
Rinse
Rinse+ (
)
Add rinse once.
Eco Hybrid (Optional) (
Use for air condensing dry without water
consumption used for condensing.
1
Press the Power button.
2
Select a drying programme.
3
Press the Eco Hybrid button for 3 seconds .
4
Press the Start/Pause button.
NOTE
• Available with the Normal or Iron programme.
All manuals and user guides at all-guides.com
)
Add Item (
)
Laundry can be added or removed after the
washing programme is started.
1
Press the Add Item button when the LED is
turned on.
2
Add or remove laundry.
3
Close the door and Press the Start/Pause
button.
NOTE
• For safety reasons, the door remains locked
when the water level or temperature is high. It
is not possible to add laundry during this time.
• If the water temperature in the drum is high,
wait until it cools down.
CAUTION
• When adding laundry, make sure to completely
push it into the drum. If laundry gets stuck in
the door latch hole, the rubber packing may
be damaged, causing water leakage and
malfunction.
• Forcing the door open may cause part
damage, destruction, or safety problems.
• If you open the door while there are a lot of
suds and water in the drum, the suds or water
may flow, causing burn injury or wet floor.
EN
29
Advertisement
Table of Contents
