Table of Contents
Advertisement
TROUBLESHOOTING
TrouBLeSHooTING
TrouBLeSHooTING
refer to the table below if this product does not function properly. If the problem you are experiencing is not listed
below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung
electronics at 1-800-SaMSuNG (1-800-726-7864).
The unit will not turn on.
• Is the power cord plugged into the outlet?
a function does not work when the button is pressed.
• Is there static electricity in the air?
Sound is not produced.
• Is the Mute function on?
• Is the volume set to minimum?
The remote control does not work.
• are the batteries drained?
• Is the distance between the remote control and main
unit too far?
The TV SoundConnect (TV pairing) failed.
• Does your TV support TV SoundConnect?
• Is your TV firmware the latest version?
• Does an error occur when connecting?
The red LED on the subwoofer blinks and the subwoofer is not producing sound.
• Your subwoofer may not be connected to the
main unit of the product.
The subwoofer drones and vibrates noticeably.
• Try to adjust the vibration of your subwoofer.
¼ Connect the power plug to the outlet.
¼ Disconnect the power plug and connect it again.
¼ Press the
(Mute) button to cancel the Mute
function.
¼ adjust the volume.
¼ replace with new batteries.
¼ Move closer to the unit.
¼ TV SoundConnect is supported by some Samsung
TVs released from 2012 on. Check your TV to see if it
supports TV SoundConnect.
¼ update your TV with the latest firmware.
¼ Contact the Samsung Call Center.
¼ reset TV SoundConnect and connect again.
To reset the TV SoundConnect connection, press
and hold the p button for 5 seconds.
¼ Try to connect your subwoofer again.
(See Page 16)
¼ Press the WOOFER button on your remote control to
adjust the subwoofer's volume level (between -12, -6
~ +6).
30
Advertisement
Table of Contents
