Table of Contents
Advertisement
REC/ARM PAUSE key
During recording, pressing this key makes about 4 seconds
blank (non-recorded) section between tunes.
1. Press the REC/ARM
PAUSE key during recording at the
point blank section is required. The unit produces about
4 seconds
blank section
and then enters the record-
pause mode.
During recording, press the REC/ARM
2. Press the REC/ARM
PAUSE key again to resume the re-
PAUSE key.
cording.
@
Tomiake less than 4 seconds blank
1. During recording, press the REC/ARM PAUSE key; the re-
cord indicator blinks.
During blinking, press the REC/
ARM PAUSE key again, the record muting is released and
the recording is resumed before 4 seconds has elapsed.
2. During the record
indicator
blinks in (1), pressing
the
PAUSE key (00) enters the record-pause mode.
@
Tomake more than 4 seconds blank
Keep pressing the REC/ARM PAUSE key for more than 4 se-
conds during recording so that the blank section of more
than 4 seconds is made.
Releasing the key enters the record-pause mode.
BLANK SEARCH
Press the Blank Search key to detect the unrecorded section
of the previously recorded tape or non-recorded section of
more than 1 minute.
SEARCH
1. When this key is pressed, the tape is advanced to detect
the non-recorded section of more than 1 minute. When
the non-recorded
section is detected, (the tape is fast-
forwarded to the end of the non-recorded section), and
then, the tape is rewound to the beginning of the non-
recorded section and 4 seconds blank will be made and
stop.
2. The linear tape counter displays the time of nonrecorded
section and during recording, the displayed time is de-
Blank Search Key
creased to function as the remaining time display.
Notes:
Pressing the stop key releases the remaining time display.
Zero-Stop function
1. When the rewind key and the stop key are pressed simul-
taneously, the tape is rewound ans stopped at the point
"[- =38]" is displayed on the counter.
2. When the fast forward key and the stop key are pressed
simultaneously, the tape is advanced and then stopped
at the point " (:23]" is displayed on the counter.
Notes:
oO
ae
When
the tape stops, the counter displays within "(:sc]"
+5
range.
Dolby Noise Reduction System
Dolby noise reduction system circuit reduces the tape hiss
noise and distortion of the high frequency components on
recording and playback.
12
kx-gg30G
Advertisement
Table of Contents
