Cd Player Operation - Sony CDC-X30MP Operating Instructions Manual

Presetting stations automatically
(Auto Memory)
1 Press TU (TUNER) repeatedly to select the desired
band (F1,F2, F3, A1,orA2).
2 Press and hold PS/A.ME until automatic presetting
station buttons in order (Preset Scan).
To cancel automatic presetting, press PS/A.ME again.
Checking the preset stations (Preset Scan)
1 Press PS/A.ME briefly.
Each preset station will be tuned in for 5 seconds in
To cancel Preset Scan, press PS/A.ME again or any
Presetting stations manually
(Manual Memory)
1 Press TU (TUNER) repeatedly to select the desired
band (F1,F2, F3, A1,orA2).
2 Press + or — to tune in to a desired station (see
"Tuning in to a station" as well for another tuning
method).
3 Press and hold the desired preset station button until
the unit beeps.
Note
A newly preset station replaces the station on the same
band that was previously stored on that preset station
Tuning in to a preset station
1 Press TU (TUNER) repeatedly to select the desired
band (FI, F2, F3, A1,orA2).
2 Press the preset station button on which the desired
Active tuning reception control (ATRC)
The unit automatically suppresses FM noise caused by
vehicle movement, and maintains sound quality.
CD PLAYER OPERATION
Playing a CD
You can play CDs, CD-Rs and CD-RWs using the
procedure described below.
Jog dial (PUSH-SOURCE)
►►!/►►, I«/-M
INT REP1 SHUF
1 Insert a CD.
"DISC" appears on the display.
CD play starts.
If a CD is already inserted, press Jog dial (PUSH-
SOURCE) repeatedly to select CD play mode.
In normal play, when the last track finishes, the unit
returns to the first track and continues to play.
5 ENGLISH