Transferring The Configuration To An Inverter - Toshiba PWU003Z Instruction Manual

5.2. Transferring the configuration to an inverter

This procedure allows the user to select the configuration file to be transferred to the inverter.
The user must already have:
-Loaded the inverter configuration file ("*.CFG") onto the Parameter writer (see section 5.1)
OR
-Generated the configuration file using PCM software and loaded this file onto the Parameter writer
STEP
• Turn the parameter writer on pressing the Power ON/OFF button for 2 seconds (see section 3.2).
• Connect the Parameter writer to the inverter using the RJ45 cable (see section 4.2).
• Press "ENT" when the screen displays "Main menu / Action".
1
• Press "ENT" when the screen displays "Action Config / MLD -> Device".
• The connection destination is searched. It may take one minute or more. If no inverter is
connected, a message "No device / connected" appears on the screen.
• Select the file to be transferred using the arrow keys and press "ENT" to start the transfer (see
section 6.7).
2
(If some folder exists in the SD card, the folder name is displayed. When selecting the folder using
the arrow keys and press "ENT", the user can access the file in the folder.)
• "Store Config / Successful" : The configuration has been transferred successfully from the
3
Parameter writer; disconnect the RJ45 cable from the inverter.
• Pressing "ENT" returns the user to the "Action Config" menu.
Note :
• Keep on pushing ESC key if the process of searching communication mode is canceled.
• Display is changed faster by keeping on pushing
• When the user is selecting the file, the folder "System Volume Information" may be displayed. It is a hidden folder
that is automatically created when SD card is connected to PC. It does not affect configuration transfers.
Main menu
1
Action
ENT
Action Config
MLD -> Device
ENT
Action Config
XXXXXXXX
MLD -> Device MLD -> Device
Filename1 Filename2
ENT
FilenameX
>>>>
FilenameX
>>>>>>>>
FilenameX
>>>>>>>>>>>>
Store config
Successful
ENT
2
MLD -> Device
FilenameN
ENT ENT
3
Procedure
or key.
-14-
E6581680