POWER SUPPLY USING AC Before use, check that the rated voltage of your unit matches your local voltage. Note: Plug is used as the disconnect device. The disconnect device shall remain readily operable. USING BATTERIES Disconnect the AC power cord from the AC inlet of the unit.
Page 3
USB Port: 5VDC,200mA Dimensions: 23.8x20.5x12 CM Weight: 0.945 KG LOCATION CONTROLS - 3 -...
Controls: CD Compartment CD Open/Close POWER ON/OFF or MODE Switch button Play/Pause/Scan/Enter Info/Stop/Menu Button Preset/Prog Button SKIP+ or TUN+ Button SKIP- or TUN- Button Volume Up (VOL+) Button 10. Volume Down (VOL-)Button 11. LCD Screen 12. FM Antenna 13. Handle 14.
Page 6
Press the MODE button to CD MODE. To open the CD door by lifting the Open/Close area near the CD door. Insert disc into the disc compartment with the title side upwards. The total playing track number will show on the LCD display, unit will begin to play the MP3/CD disc.
Page 7
Make sure the CD is in stop mode. Press the PROG button once,” PROGRAM INPUT P-01 01” will show on the LCD display. Press the SKIP + button / SKIP - button until the desired track number is reached. Press the PROG button to store the selection. Repeat (4) &...
Page 8
the “Rep all” appear on the LCD display. The unit will play all the tracks on the disc repeatedly. Press the Preset button again, “Random” will be showed on the LCD Screen, the unit will randomly play all the tracks in the CD continuously.
Page 9
3. Press the MODE button switch to BT MODE. Turn on the Bluetooth mode of your Bluetooth device and enable the search or scan function to find the “Majority DAB Boombox”, select “Majority DAB Boombox” from the - 9 -...
Page 10
“Majority DAB Boombox” to pair (link) the unit with your device, “tap-tap-tap” can be heard and unit will playback the music from your Bluetooth device. After successfully pairing (linking), you can press the PLAY/PAUSE button to play music from your Bluetooth device wirelessly to the speaker.
Page 11
sound. Press INFO button to change the type of information show on the display (frequency/audio status/time/date). Press and hold POWER on/off button to turn off radio mode. To obtain the best FM reception, fully extend the FM antenna. other electrical Avoid close proximity to the speakers and appliance.
Page 12
mode. Noe: If there is no DAB reception at any time, change the position of the unit or adjust the antenna. Press SCAN button to start a new search. Storing FM or DAB stations You can store up to 20 pre-set FM stations or DAB stations.
Page 13
GENERAL MANUAL SETTING FM mode: MANUE Press and hold button, you can press SKP-/+ buttons to select Scan setting / Audio setting / System setting/Preset Store/Preset Recall Press SKP-/+ buttons and press ENTER button to select Scan setting, Press SKP-/+ buttons and press ENTER button to select ALL Station or Strong Station.
Press SKP-/+ buttons and press ENTER button to select Scan setting. Press SKP-/+ buttons and press ENTER button to select Manual tune the DAB station. Press SKP-/+ buttons and press ENTER button to select whether Prune station (yes or no). System setting when FM/DAB/AUX mode: MENU Press and hold...
Page 15
(1) Check that you are in CD mode. If you are not already in CD mode, press Power button to function select status, then press the Mode button to select CD mode. (2) When unit in CD mode, you can see the total number of the tracks, please press PLAY/PAUSE button to play the CD disc.
Page 16
(1) Check that you have extended the wire radio aerial in a vertical position. (2) Press SCAN button or TUN+/- button to tune radio station. (3) Check there are no other electrical appliances within 1 meter of your boombox, which may be causing interference.
Page 17
cloth, wipe the disc lightly with a slightly damp soft cloth and then wipe with a soft dry cloth. (5) Do NOT use any type of solvent, commercially available cleaners or antistatic spray for vinyl as it may damage the disc. (6) Do NOT store discs in places subject to direct sunlight or near a heat source.
Need help?
Do you have a question about the DAB-624 and is the answer not in the manual?
Questions and answers