EML EP725 Instruction Manual

EP725 / 95128
I. Basic Operations
1. Power on (or RESET) and accompanied by a "beep" sound, then turned into the normal clock
status.
2. Press MODE button to switch the time, date and alarm mode.
3. In each mode, press and hold MODE button for 3 seconds to enter setup.
4. In each setting mode, press UP/DOWN button to adjust the settings, press and hold UP/DOWN
button to accelerate increment/decrement.
5. In any mode, not setting mode, press DOWN button for °C/°F conversion.
6. In any mode, press UP button to turn on/off the alarm.
7. In any mode, press and hold the UP button for 3 seconds to switch 12/24 hour.
8. When the alarm rings, press SNZ(SNOOZE) button to turn on the snooze.
9. Press MAX/MIN button: to view maximum/minimum/current temperature and humidity.
II. Detailed Operation Instructions:

1. Mode Conversion:

•
Press MODE key to convert the mode according to the order: Time Mode —Date Mode —Alarm
Mode— Return to Time Mode.
•
In date mode and alarm mode, if no button operation in about eight seconds, the system will
return to normal time mode automatically.

2. Clock Mode:

•
Power on (or RESET and accompanied by a "beep" sound, then turned into the normal clock
status, default: Time: 0:00 (24-hour): January 1, 2018, MON; alarm clock: 0:00 (closed).
•
In any mode, press and hold UP button for 3 seconds to switch 12/24 hour. 12HR timing system,
there is a sign "PM" in the afternoon.
•
In normal clock state, hold MODE button for 3 seconds to set the time according to the order:
Hour- Minute-Exit. Complete the setting by UP/DOWN button and press UP or DOWN button to
accelerate increment/decrement.
•
Setting range: hour range is from 1 to 12 or 0 to 23, and minute range is from 0 to 59.
•
In the setting mode, press MODE button or no button for 8 seconds to automatically exit the
setting mode and display the time currently set.

3. Date Mode:

•
In date mode, the default is " January 1, 2018, MON ".
•
In the normal date state, press and hold MODE button for 3 seconds to set the date according
to the order: Year-Month-Day-Exit. When setting, complete the setting by UP/DOWN button, and
press UP or DOWN button to accelerate increment/decrement.
•
Setting range, month range is from 1 to 12, day range is from 1 to 31 and year range is from
2000 to 2099.
•
While setting the date, the week is automatically changed accordingly from MON to SUN.
•
In the setting mode, press MODE button or no button for 8 seconds to automatically exit the
WEATHER STATION WITH DIGITAL CLOCK
Instructions manual
English