Configuring Audio Settings; Changing The Audio Language/Format; Changing The Audio Channel; Adjusting The Audio Output Level - Dolby D Level - Sony XNV-660BT Owner's Record

E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
00US+00COV-U.book Page 26 Monday, June 7, 2010 1:53 PM

Configuring audio settings

Note
Discs in DTS format are not supported. The sound is
not output if the DTS format is selected.
Changing the audio language/
format
The audio language can be changed if the disc is
recorded with multilingual tracks. You can also
change the audio format when playing a disc
recorded in multiple audio formats (e.g., Dolby
Digital).
1
During playback, touch "DVD Control."
2
Touch "Audio" repeatedly until the
desired audio language/format
appears.
Audio language
Source List ATT
Audio 1: English
Audio Subtitle
15
Audio format/channel numbers*
The audio language switches among the
available languages.
When the 4-digit input prompt appears, input
the language code (page 73) for the desired
language.
When the same language is displayed two or
more times, the disc is recorded in multiple
audio formats.
* The format name and channel numbers appear as
follows.
Example: Dolby Digital 5.1 ch
Rear component × 2
Dolby D 3 / 2 . 1
Front component × 2 +
Center component × 1
To close the DVD control menu, touch "DVD
Control."
26
Navi Top
Dolby D 3/2.1
Angle Top Menu Menu
DVD Play Menu
Control SHUF
12:00
LFE component × 1

Changing the audio channel

MPEG-4
When playing VCD/CD/MP3/WMA/AAC/
MPEG-4, you can select the right or left channel
sound to listen through both right and left
speakers.
The options are indicated below.
"2-Ch": Standard stereo sound (default)
"L-Ch": Left channel sound (monaural)
"R-Ch": Right channel sound (monaural)
For VCD/CD/MP3/WMA/AAC
1
During playback, touch "Play Menu,"
then "Stereo" repeatedly until the
desired audio channel appears.
For MPEG-4
1
During playback, touch "Play Menu,"
then "Audio" repeatedly until the
desired audio channel appears.
To close the play menu, touch "Play Menu."
Note
You may not be able to change the audio setting
depending on the disc.
Tip
The operation by the card remote commander
(pressing (AUDIO) repeatedly) is also available.
Adjusting the audio output level
— Dolby D level
You can adjust the audio output level for a DVD
recorded in Dolby Digital format, to reduce the
volume level differences between disc and
source.
1
During playback, touch "Play Menu."
2
Touch the "Adjust" box to set to "ON."
3
Touch –/+ repeatedly to adjust the
output level.
The output level is adjustable in single steps,
between –10 and +10.
To close the play menu, touch "Play Menu."
XNV-770BT/660BT
masterpage:Left
4-197-968-11 (1)