Download Print this page

Set Up Your Smart Device Via Matter - TP-Link tapo TP25 User Manual

Smart wi-fi outdoor plug

Advertisement

Set Up Your Smart Device via Matter

This is a Matter-certified device. You can integrate it into any Matter ecosystem you prefer for easy control, such as Alexa, Google, and Apple
ecosystems. As IoT manufacturers are working to optimize the user experience of Matter setup, the setup process and user experience should improve
over time. Follow the instructions below to set up your smart device via the Matter app.
Before You Start
• Get a Matter Controller: This is needed to connect and manage Matter devices on your home network.
For instance, Apple TV and HomePod are examples of Matter controllers.
For details, please refer to the Part 3. General Questions for TP-Link Matter-enabled Devices at https://www.tp-link.com/support/faq/3520/.
• Reset Your Device: It's important to start with a fresh device. Here's how:
- For most devices: Press and hold the 'Reset' button for 10 seconds.
- For smart bulbs: Turn the light switch off and on five times, with a 2-second pause between each action.
• Connect to Wi-Fi: Connect your phone to the same Wi-Fi network as your Matter controller. Choose the 2.4 GHz network if 2.4 GHz and 5 GHz
networks are separate.
• Access Matter Setup Mode: This mode turns off in15 minutes after the device is powered up. To return to setup, simply turn your device off and
then back on.
• Locate Matter Setup Code: Look for a QR code or a numeric code on your device or in its packaging. Snap a picture of it for future reference.
• Regarding the Matter Code: The original Matter code can only be used for setup in one app (you can reuse it after a device reset). If you wish to set
it up in multiple apps, generate a new code using the first app for all subsequent ones.
How to Set Up
*Setup processes may vary between different apps.
• 1. Turn on Bluetooth on your phone.
• 2. Open the smart home app, and either scan the Matter QR code or input the given numeric code.
• 3. Connect your device to the same network as your controller.
• 4. Follow the instructions in the app to complete setup.
7

Advertisement

loading