Advertisement
Quick Links
Revision 2.0 - October 2023 - Copyright © 2023 Genexis Netherlands B.V. All rights reserved.
Multiple languages of this document and additional product information are available on https://genexis.eu/product/pure/downloads
Genexis assumes no responsibility for any inaccuracies in this document. Genexis reserves the right to change, modify, transfer, or
otherwise revise this publication without notice.
Pure
E600
Installation Guide
Wi-Fi EasyMesh
supported
TM
Advertisement
Summary of Contents for Genesis Pure E600
- Page 1 Pure E600 Installation Guide Revision 2.0 - October 2023 - Copyright © 2023 Genexis Netherlands B.V. All rights reserved. Multiple languages of this document and additional product information are available on https://genexis.eu/product/pure/downloads Genexis assumes no responsibility for any inaccuracies in this document. Genexis reserves the right to change, modify, transfer, or Wi-Fi EasyMesh supported otherwise revise this publication without notice.
- Page 2 Installation and management of the Genexis 2. Use the drilling guide to drill the holes, insert Pure E600 device can be done with help of the plugs and put screws into place. mobile application Genexis EasyWiFi. Please 3. Remove the stand from the device by sliding follow the steps on the left page.
- Page 3 1. Use a web browser on your personal device the Pure E600 and plug the adapter into a hold the Mode button until the WiFi LED label of the Pure E600 or use the Mode button and navigate to ‘GUI’ as printed on the label power socket.
-
Page 4: Port Overview
LED & button overview Port overview Status LED Reset button (recessed) Green - system is operational ready Reboot - press and release once Yellow - system startup USB 2.0 Factory reset - press and hold until all LEDs Yellow (blinking) - system is not ready yet port start fast blinking green Blue - automated pairing successful... - Page 5 Is the WiFi LED off? start fast blinking green. and your personal device failed. Please follow The WiFi of the Pure E600 is turned OFF. 2. Wait until the Status LED turns solid the instructions again to connect your personal Please turn the WiFi ON as described in this green again.
-
Page 6: Eu Declaration Of Conformity
EU Declaration of Conformity Hereby, Genexis Netherlands B.V. declares that the radio equipment type Pure E600 is in compliance with Directive 2014/53/EU, Directive 2009/125/EC, Directive 2011/65/EU and Delegated Directive 2015/863. The full text of the EU declaration of conformity is available at the following internet address: https:// genexis.eu/product/pure/red/pure-e600...
Need help?
Do you have a question about the Pure E600 and is the answer not in the manual?
Questions and answers