Rewinding In Mid-Roll - Pentax ZX-M Operating Manual

7
3
3 Before opening the back cover, check that [ Q] is
blinking. Open the back cover and remove the film,
• Never open the back cover until the whole film roll
is completely rewound.
• When removing the film from the camera, protect
it from exposure to direct sun light.
• A roll of 24-exposure film takes about 13 seconds
to rewind. ^
• The shutter may be released a frame or more after
the specified number of frames have been used as
indicated by the number of frames on the film car¬
tridge. However, those extra frames may be lost in
processing. When you take important pictures,
rewind the film when the film reaches the number
of frames indicated on the film cartridge.
*
If you wish to unload the film before exposing all the
frames, use this function.
1 Set the main switch to the [ ON ] position.
2 Depress the mid-roll rewind button by using the
protruding part of the strap clamp.
3 Before opening the back cover, check that [ Q ] is
blinking.
4 Open the back and remove the film.
• Do not depress the button with an object having a
sharp tip.