Advertisement
3.5
Screw fix the bracket to the chosen surface using fixings that are appropriate to the substrate and
strong enough to carry the weight of the reel plus the working strain exerted on it when in use.
When fixing to a vertical surface ensure that the bracket is vertically aligned.
3.6
Align the tubular bracket mountings on the reel with the holes in the mounting bracket and slide
the swivel tube through both items to fix the reel to the bracket. Ensure that the retaining flange
on the tube is at the top of the bracket when the reel is mounted vertically.The swivel tube for the
standard bracket is pierced at one end so that a padlock can be attached to it for security
purposes.
3.7
Connect the air supply to the reel using a flexible hose sufficiently long to allow the reel to swivel
180
from side to side.
O
3.8
When the reel is positioned overhead the swivelling action can be locked by the use of the
‘steady’ bracket provided (as shown in fig.5-A). The steady bracket is positioned between the
main casing and the mounting bracket and is held in position when the swivel tube is inserted.
The steady bracket is not recommended for wall mounting.
4.
OPERATION.
4.1
Pull out the hose to the required length.
NOTE: A clicking noise can be heard every half revolution of the drum.
4.2
To latch the reel, allow the reel to slowly retract after hearing the 1st, 2nd or 3rd click.
4.3
To unlatch the reel, slowly pull out the hose until the clicking noise stops, then let the hose slowly retract until the hose stopper rests
against the reel mouth.
WARNING! To prevent injury or damage occurring, do not let go of the hose during rewinding.
p
p
5.
MAINTENANCE & STORAGE
WARNING! Before carrying out routine maintenance or inspection, vent any pressure remaining in the hose.
p
5.1
The hose reel does not require special maintenance as it is lubricated for life. To ensure reliable operation, clean the hose and
p
casing regularly. DO NOT spray or wet the product, but clean with a cloth and warm water. DO NOT use solvents or detergents, as
these may permanently damage the plastic .
5.2
There are no user serviceable parts. All maintenance and repairs which require the case to be opened or dismantled should be
carried out by an authorised service agent only.
WARNING! DO NOT dismantle the hose reel casing, or attempt to remove the screws and covers on the sides. To do so may result in
p
damage to the appliance and/or personal injury and will invalidate the warranty.
STORAGE:
Should you wish to store the air hose, ensure it is clean and dry. Place the item in a dark, safe, dry, childproof location, where the
temperature will remain reasonably stable. DO NOT store in a nylon, or plastic, bag as this will encourage condensation.
6.
TROUBLESHOOTING.
PROBLEM
POSSIBLE CAUSE
Hose will not retract. Hose bunching within reel.
Spring tension too tight.
Replacement hose too heavy.
Reel will not latch.
The hose has been pulled past the latching teeth.
Broken latching pawl or pawl spring.
Reel leaks.
Damaged hose.
Loose air connection.
Worn swivel seals.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
SOLUTION
Pull hose out of reel and guide back in.
Have spring tension adjusted by authorised service agent.
Have correct hose fitted by authorised service agent.
Allow reel to retract slowly after hearing 1st, 2nd or 3rd click.
Have new latching pawl or pawl spring fitted by authorised
service agent.
Have new hose fitted by authorised service agent.
Tighten fitting.
Have new seals fitted by authorised service agent.
01284 757500
01284 703534
fig 5
A
www.sealey.co.uk
Web
sales@sealey.co.uk
email
SA88.V3 - 1 - 080804
Advertisement
