Kenwood KR-200HT Instruction Manual page 20

Operation of
For the connections and operations, also read carefully the
instruction manuals of the video components.
video components
RUE ae ER pi i Aa Mle RES Stee
KR-200HT [En/K}
Keys or controls to be used in this operation
Playback of videotape
Turn the power of the monitor TV ON.
2 Select the VIDEO1 or VIDEO2 input.
The input sources are switched in the following order
iV TUNER (frequency display)
'2 PHONO
'3 VIDEO) (TAPE1 or MD}*!
4 CD
Ss VIDEO2
INPUT SELECTOR
"VIDEO1" or "VIDEO2* should be displayed
hot ulmi ft
Select the input to which a video deck is connected
@*': How to switch the display (iz =e
For the operations of the monitor TV and video deck, refer to their
instruction manuals EE] Piay the video deck.
Recording of video source (VIDEO 2—> VIDEO 1)
. @ Connect the component to be played to the VIDEO 2 jacks
1 Connect the video Source component to be @ The connectable components include a video deck (playback
played. only), video camera (playback only), LD player or DBS tuner
EJ Select the VIDEO 2 input.
The input sources are switched in the following order:
TUNER (frequency display)
PHONO
@} VIDEO? (TAPE1 or MD)
@ CD
&: VIDEO2
INPUT SELECTOR
*VIDEO2" should be displayed
3 | Play the source component.
Start recording on the recording video deck.
Start recording with the video deck which is connected to the VIDEO 1
Jacks.