1. Manuals
  2. Brands
  3. Orlaco Manuals
  4. Thermal cameras
  5. TIC Ex Alu
  6. Manual

Orlaco TIC Ex Alu Manual

Thermal image camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RS-232 Interface
Thermal Image Camera TIC Ex Alu
Thermal Image Camera TIC Ex SSt
Set Ex Board plate
Manual No. IM0973151 A 02
6/2016
English
Ex Specifications
CE344
Thermal Image Camera TIC Ex Alu/SSt
Ex II 2 G Ex ib mb px IIC T4 Gb
Ex II 2 D Ex mb tb IIIC T102°C Db
T-amb. -20°C to +75°C
Thermal Image Camera TIC Ex Alu
WARNING: Do not open the enclosure in a
non-safe environment.
The enclosure is protected by static
pressurisation (Nitrogen).
The enclosure shall be filled only in a
non-hazardous area by the manufacturer.
Thermal Image Camera TIC Ex SSt
Set Ex Board plate

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TIC Ex Alu and is the answer not in the manual?

Questions and answers

Summary of Contents for Orlaco TIC Ex Alu

  • Page 1 RS-232 Interface Thermal Image Camera TIC Ex Alu Thermal Image Camera TIC Ex SSt Set Ex Board plate Manual No. IM0973151 A 02 Thermal Image Camera TIC Ex Alu 6/2016 English Thermal Image Camera TIC Ex SSt Set Ex Board plate...

  • Page 2: Table Of Contents

    0192011 RS232 Camera TIC Ex Alu/SSt Ex specifications Only use the Thermal Image Camera TIC Ex Alu/SSt in equipment is not permitted. Certificate number • The safety devices will remain in operation protected by intrinsic combination with the Set Ex Board plate and the Junction...

  • Page 3: Mounting

    Set Ex Board plate. The Thermal Image Cam- 2 = Black/blue 0V intrinsic era TIC Ex Alu/SSt is powered by the Set Ex Board plate. Powering Set Ex 3 = Blue camera OK in Board plate → powering Camera TIC Ex. See figure 6.

  • Page 4: Standard Configuration

    Twist coax shielding to one wire 5 = Red/White 12 = Brown The Thermal Image Camera TIC Ex Alu/SSt may only be switched on if the 6 = Black/White 13 = Red/Blue system has been installed in the prescribed way.

  • Page 5: Optional Configuration

    5.4. Optional configurations See figure 9. To view the pictures of the Thermal Image Camera TIC Ex Alu/SSt ; vari- ous displays can be used. The Set Ex Board plate may by applied in a 19 inch rack. In this rack several Set Ex Board plates can be mounted. See figure 6A, page 6.

  • Page 6: Instructions For Use

    Pan,tilt to operate the PT TIC unit from the keyboard and select ‘TIC’ for the Thermal image camera functions See figure 10. TIC = Enable this option if an Thermal Image Camera TIC Ex Alu/SSt is connected.

  • Page 7: Set Ex Board Plate

    By pushing S105 on the Set Ex Board plate the pressure sensor For more information and specifications of the Set Ex Board plate; see signal from the Set Camera TIC Ex Alu/Sst is overruled by 0V. grip data sheet DS0404960.

  • Page 8: Type Plates Set Ex Board Plate

    Tighten dome nut Units: Scale: 1:1, 5:1 Designed by: 60 mm 15 mm 75 mm PROPERTY OF: ORLACO PRODUCTS B.V. THE NETHERLANDS Drawn by: Shrink sleeve Ex board box around the gland Insert cable into fitting Heat shrink sleeve see chapter 5.3.

  • Page 9: Specifications

    Installation Manual Installation Manual 11. Specifications Camera TIC Ex Alu/SSt 12. Pelco-D commands Sensor Pelco-D protocol as implemented in Orlaco Zoom camera or PTZ unit. Sensor Thermal Imager Uncooled VOx Microbolometer. Commands detailed below are accepted, no responses are sent. Pixels FPA Format 324 x 256 (25-micron pixel size).

  • Page 10: Disposal

    Preset ID valid range = 0-5. also applies to the associated drawings and figures. Set Zoom Speed: Orlaco Products BV reserves the right to make changes to components at any time without informing customers beforehand or directly. All dimen- Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 sions given are for commercial purposes.
  • Page 11 Installation Manual Installation Manual 15. Release Notes 16. Apendix R1-0. Orlaco layout Edition, June 2016 ATEX R1-1. ATEX Certificate revised, October 2016 R1-2. DOC added, October 2016 A 01. Specifications; temperature range Camera changed, June 2017 A 02. Article numbers Cameras changed, RS485 deleted, June 2017...
  • Page 12 Installation Manual IECEx EU declaration of conformity In accordance to annex X of the European directive 2014/34/EU (as last amended). Manufacturer: Orlaco Products B.V. Albert Plesmanstraat 42, 3772MN Barneveld The Netherlands Description of the equipment, protective system, or device referred to:...
  • Page 13 ORLACO Orlaco is a Manufacturing company that specializes in making cameras and monitor systems for commercial vehicles, fork-lift trucks, cranes, off shore and maritime. Our objective is to design and produce camera systems for the profes- sional market that improve the drivers view and increase operating efficiency.

This manual is also suitable for:

Tic ex sst

Table of Contents