Pairing
Only for the model with the Touch Pad Controller
Perform the registration when Touch Pad Controller is used for the first time.
The registration starts automatically when you press any buttons (except
Standby On / Off switch) after installing batteries.
To register again, take following steps.
1. Display the menu with MENU.
2. Select
Setup
>
Touch Pad Controller
3. Follow the on-screen instructions.
= Note =
Place Touch Pad Controller within 50 cm from the TV while registration is
●
in progress.
Only 1 Touch Pad Controller can be registered.
●
>
Pairing
and press
- 230 -
OK
to access.