Servicing - Zanussi DI 720 Instructions For The Use And Care

Servicing
If, having followed these instructions
carefully, your machine fails to work
properly, contact your local Zanussi
Service Network. Before you do that,
though, it is worth making a few simple
checks yourself.
If the machine won't start...
e Make sure the appliance is properly
plugged in and that the socket switch is in
the «on» position.
e Check that there is power in the socket,
by plugging in an appliance which you
know to be working - a small lamp for
example. If this too fails to work, check
the main circuit fuses in your home's
consumer unit or the main fuse box.
e Make sure the water tap is fully open.
e Check that the door is firmly shut.
e Check that you have set the programme
selector knob correctly and pressed the
start button.
If the machine won't fill...
e Make sure taps and stop cocks are
turned on.
e Make sure the supply hose/hoses are
not sharply bent.
If the machine won't drain...
e Check that the drain hose is not bent,
blocked, or obstructed in any other way.
e Make sure that the filter is not clogged.
24
If the crockery does not come out clean...
e Make sure that you are using a
detergent specially made for dishwashers.
e Make sure that you are using enough
detergent.
e Check that you have loaded the
crockery etc correctly.
e Check that the spray arms are able to
turn freely and that the nozzles are not
blocked or obstructed.
e Make sure that the filter is clean.
If you find the crockery streaked with lime
deposits...
e Check that there is enough salt in the
container.
e Check that there is enough rinse aid in
the container.
e Make sure that the quantity of rinse aid
being dispensed is sufficient (see page 13).
If you find traces of tea and coffee or
lipstick left on the crockery...
e Make sure you are using enough
detergent.