Auto Return - Yamaha PX-2 Owner's Manual

When play is to be started midway in disc
1. Move the tonearm to the desired position, using
the LEFTWARD FEED switch. This will cause
the platter to start rotating.
2. Depress the DOWN switch to lower the tonearm
to start disc play.
3. On completion of disc play, operations will be
completed, following AUTO-RETURN of tone-
arm.
REPEAT play is not possible when play has been
started with manual operation.
«4 "<A p-p b/bb
When disc play is to be discontinued mid-
way in play
Depress the CUT switch. Play will be discontinued
at that position. Following AUTO-RETURN of
tonearm, operation will be completed.
*
To protect the cartridge should power supply be
discontinued because of service interruption
during disc play, or should the power switch be
switched off by mistake, the unit has been
designed so that the tonearm will stop in an
uplifted position. When power supply has been
restored, start operation again.
Servo system
TONEARM SECTION
Arm type Linear tracking arm
Photo-electric tracking sensor pius servo motor
236 mm (9-9/32")
190mm (7-15/32)
Static balance type sliding weight
Total length
Effective length
Tracking force device
system 0 ~ 2.5 g, in 0.1 g steps
Proportional type to tracking force
1.0 g (Tracking force) 16.5g
1.5 g {Tracking force) 17.0g
2.0 g (Tracking force) 175g
Effective mass
(In cartridge-less state)
Applicable cartridge weight range 5~ 11g
(Using sub-weights } 10 ~ 169
Maximum horizontal tracking error angle +0,15°
At stylus tip +0.5 mm
Arm lifter Oil damp type cueing
Adjustable range of arm height +4.0 mm
Head shell Pure, forged aluminum, Weight: 8.0 g
Plug-in type conforming to EIA Standards
PU Cable NEGLEX 2496
Low-impedance, double cylindrica! cord
Capacitance: 130pF
Resistance: 1 2
Cartridge (Not provided} Replaceable
ROTARY SECTION
Motor DC, 4-phase, 8-pole coreless Hall motor
Starting torque 1 kg-cm, or more
Drive system Direct drive
Servo system Quartz PLL, Negative/positive two-direction servo
Locking torque 450 g-cm
F.G. Total circumference integrating type
Speed (With Lock Indicator} 33-1/3 r.p.m., 45 r.p.m.
Platter 31 cm (12-1/4"") diameter, aluminum die-cast
Weight: 2.1 kg (4.62 Ibs) (including rubber mat)
Moment of inertia 270 kg-cm* (Including rubber mat)
EXTERNAL DESIGN
Cabinet Aluminum, die-cast, Bmm thick black enamel coating
Dust cover Acrylic, 5mm thick, weighing 1.3kg
Front operating type.
Hinges Free stop, detachable type
Insulator Combination of spring-and -rubber type
with height adjustment
CONTROL SECTION
Automatic functions AUTO-LEAD-IN
AUTO-RETURN
REPEAT
AUTO-UP (During Power-OF F)
Size selector 17/25/30 cm (7"/10/12"")
Manual functions ARM-UP
ARM-DOWN
LEFTWARD & RIGHTWARD 2-speed feeding
CUT
Speed 33-1/3 r.p.m. and 45 r.p.m.
Others Power switch
GENERA L
S/N ratio 80dB (IEC 98A Weighted)
Wow and flutter 0.01% WRMS (FG direct)
Power supply and consumption
U.S.A & Canadian Modeis
European Model 220V AC, 50Hz ... 25W
Australian 8 British Models 240V AC, 50Hz ... 25W
Genera! Model 110/120/130/220/230/240V AC, 50/60Hz ... 22W
493 x 156 x 428
(19-7/16") x (6-5/32") x (16-27/32")
17 kg (37.4 Ib)
120V AC, 60Hz ... 25W
Dimensions (W x H x D) mm
Totai weight
Specifications are subject to change without notice.