Pioneer VSX-5700S Service Manual page 45

Audio/video stereo receiver
Hide thumbs Also See for VSX-5700S:
Table of Contents

Advertisement

=> Gi-7
40] er)
{AUDIO IN (L, R)]
Connect to the AUDIO OUTPUT jacks of the second VCR.
@® VIDEO OUT TO MONITOR TV jacks
Connect to monitor TV or to TV sets with video input terminais for
watching program materials from a VCR or VDP/CDV connected to this
unit.
FRONT SPEAKERS terminals
A: Connect to a first set of speakers.
B: Connect to a second set of speakers.
Speaker lead wire preparation and connection.
Cutter
fe)
~
=
Speaker cable
:
10 mm
|_| in)
Twist the strands.
fe}
@ Push up
cy
Push down.
@ insert
NOTE:
Do not allow any of the cord's conductors to protrude from the terminals
or touch any other conductors. Malfunctioning or breakdowns may
occur when conductors come into contact with each other.
Use speakers of impedance 4 Q—16 Q. Also set the IMPEDANCE
SELECTOR switch to match the impedance of your speakers.
@ CONTROL IN/OUT jacks
NOTE:
To the CONTROL
==
IN jack of other
component.
Receiver
Pioneer component
bearing the
mark.
Remote control
unit
Connect the adaptor (MR-100, sold separately) to this Multi-Remote
IN jack. You can operate the unit by remote control through the adaptor.
It is convenient when the unit is located in a separate room.
72
@ IMPEDANCE SELECTOR switch
Set this switch to match the impedance of your speakers.
position
position
®
@
A ORB:
A ORB:
40 TO LESS
82 OR
THAN 8&0 ~
MORE
A + B: 80 OR MORE
¢ When using. a pair of speakers:
anemee
—f
O
¢ When using two pairs of speakers:
Select @ as the selector switch position and use speakers having
impedance of 8 ohms or more.
NOTE:
Tum off the receiver's power before changing the impedance selector
switch setting.
@ Power cord
Manufactured under license from Dolby Laboratories Licensing
Corporation.
Additionally licensed under one or more
of the
following patents: U.S. numbers 3,632,886,
3,746,792 and
3,959,590;
CANADA
numbers
1,004,603
and 1,037,877.
"'Dolby'' and the double-D
symbol are trademarks
of Dolby
Laboratories Licensing Corporation.
Manufacturé
sous
licence
de
Dolby
Laboratories
Licensing
Corporation. En outre, sous license d'un ou plusiers des brevets
suivants:
numéros
américains
3,632,886,
3,746,792
et
3,959,590; numéros canadiens 1,004,603 et 1,037,877.
Le
terme ''Dolby"' et le symbole Double-D sont des marques déposées
de Dolby Laboratories Licensing Corporation.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vsx-5600

Table of Contents