DESCRIPTION OF THE TOOL OPERATING CONTROL pump 1. MAIN PARTS 1. LED Workligh 2. ON/OFF Switch 3. Lock-On Button 4. Handle 5. Battery Pack* 6. Cover 7. Air Hose 8. Air-Chuck Clamp storage 9. Air Chuck 10. Air-Chuck clamp 11. Tools and Adapters 12.
TOOL SPECIFICATIONS DI-1015 Model Battery Type 12.0 Hose Length 18 in. Gauges Digital readout (PSI, kg/cm2, and BAR) Maximum Air Pressure Output 200PSI / 14 kg/cm2 / 13.8 BAR 2 lbs Battery Type Lithium-Ion Charger Input 90-140 V Optimum Charging Temperature...
GENERAL SAFETY RULES GENERAL SAFETY RULES WARNING: Read all instructions. Failure injury. A moment of SAVE THESE INSTRUCTIONS result in serious personal injury. accidents. plugging in. or fumes. Distractions can cause you to lose control. situations.
Page 15
accidentally. untrained users. SAFETY RULES FOR BATTERY easier to control. circuiting. Use of situation. DC-10B explosion. Properly dispose of a dropped or...
9) Do not charger a battery tool in a damp or ADDITIONAL SAFETY RULES wet location. Following this rule will reduce the risk of electric shock. WARNING: The safe use of this product SAFETY RULES FOR CHARGER requires an understanding of the information on the tool and in this operator’s manual, as well as knowledge of the project you are attempting.
4. WHEN TO CHARGE THE BATTERY PACK OPERATION 1. LOW-BATTERY CAPACITY INDICATOR at any time and will not develop a “memory” when charged NOTICE: 5. BATTERY CHARGING 2. BATTERY PROTECTION NOTICE: 3. COLD WEATHER OPERATION...
Page 18
7. TO ATTACH BATTERY PACK 6. HOW TO CHARGE THE BATTERY PACK Align raised ribs on battery pack with groove NOTICE: The Lithium-Ion battery pack is shipped partially charged. into the handle to attach the battery pack to the battery pack. 1.
Page 19
TO DETACH BATTERY PACK AIR HOSE CLAMP NOTICE: NOTICE: pressure readings. Make sure all connections 7. TO STORE THE HOSE AND AIR-CHUCK NOTICE: compartment to secure it in place. commercial applications. opening. 8. INFLATING WITH THE AIR HOSE WARNING: exceed recommended pressures. Use only WARNING: 9.
Page 20
stops. To Loosen AIR HOSE CLAMP PRESTA ADAPTER sports needle. PRESTA Tapered Sport Adapter Adapter locks into place. adapter.
Page 21
3) To remove the adapter, lift the air chuck The orange LED on the FuelGauge indicates clamp and remove the adapter from air that the battery has used approximately one chuck. half of its charge The red LED on the FuelGauge indicates TO LOCK the battery pack is depleted and needs to be charged.
Page 22
NOTICE: 19. DIGITAL GAUGE pressures up to 40 PSI, 2.75 BAR, and 2.80 to automatically stop at 40 PSI 2.75 BAR, operations. pressure measurement units from PSI to BAR NOTICE: To turn the digital gauge ON, slide the ON/OFF switch forward to the “ON” position.
TOOL MAINTENANCE ENVIRONMENT PROTECTION serious accident. 2. Inspect tool cords periodically. If damaged, process. SERVICE from oil and grease. WARNING: use of damage. PROBLEM CAUSE Battery is depleted Motor Be sure Clean, clear are free from dust and operation...
Original Language Serial Number: Please refer to the tool Cordless Impact Screwdriver with Battery Pack Item No.:DI-1015 / DB-1015 (Tool / Battery Pack) 12 Vd.c., 1.5 Ah, Li-ion Battery the relevant provisions of (MD) Machinery Directive 2006/42/EC, (LVD) Low Voltage Directive 2006/95/EC, (EMC) Electromagnetic Compatibility Directive...
Page 28
Mighty Seven warranty this product for one year from date of purchase.We will repair, without charge, any defects due to faulty material and/or workmanship. Please retum the complete unit, transportation perpaid , to any local m7 Service Center with valid m7 warranty card AND invoice/receipt copy.