Plant Monitor - SunFounder ESP32 Manual

1.36 6.6 Plant Monitor

Welcome to the Plant Monitor project!
In this project, we will be using an ESP32 board to create a system that helps us take care of our plants. With this
system, we can monitor the temperature, humidity, soil moisture, and light levels of our plants, and ensure that they are
getting the care and attention they need to thrive.
Required Components
In this project, we need the following components.
It's definitely convenient to buy a whole kit, here's the link:
Name
ESP32 Starter Kit
You can also buy them separately from the links below.
COMPONENT INTRODUCTION
ESP32 WROOM 32E
ESP32 Camera Extension
Breadboard
Jumper Wires
DHT11 Humiture Sensor
I2C LCD1602
Centrifugal Pump
L293D
Button
Photoresistor
Resistor
Soil Moisture Module
Schematic
1.36. 6.6 Plant Monitor
ITEMS IN THIS KIT
320+
SunFounder ESP32 Starter Kit
LINK
PURCHASE LINK
-
-
-
125