Philips 27PT9015D/37B Connection Manual

3
Connecting Hi-fi System or External Speakers to TV
Better
SPDIF (Sony and Philips Digital Interconnect Format)
is highly recommended for high quality digital
surround sound output.
Connect red/while audio cables from the TV
A
monitor output jacks to the rear of hi-fi system
or external speakers.
Monitor out AV1 in AV2 in
TV Jack Panel
VIDEO
Y
L/Mono
Pb
AUDIO
S-VIDEO
R Pr
COMPONENT VIDEO INPUT
OR
A
TV
IN
Need more help?
:
User manual:
Check the user ma ual that came with your n TV.
Online help www.p4c.philips.com or
www.usasupport.philips.com
2005 © Koninklijke Philips Electronics N.V.
All rights reserved.
3139 125 35352
Connect audio cable from the SPDIF jack on the
B
rear of the TV to the DIGITAL IN jack on the
rear of the hi-fi system or external speakers.
B
How t o
make the best connection
Use this guide to achieve the optimal connection for each of your components.
TV can support these different types of cable connection. Please check your
device to see which one applies.
Connection Basics
Better
Component Video S-Video
Input (CVI)
Supplies a better picture
than RF and Composite
Provides superior picture
connections. Used with
quality by separating the
red/white audio cables.
green, blue and red
luminance signals. Typically
used with red/white
audio cables.
1
Connecting Set-Top Box to TV
RF Cable
Cable Signal IN
C
from Cable Company
A
AUDIO IN SPDIF
-
R L
CABLE
IR DVD-D OUT
TO
IN
TV/VCR
AUDIO OUT Y Pb
USB
TV
PASSCARD
B
75
75 Input Monitor out
TV
Good Basic
RF
Composite Audio/Video
Separate video (yellow) and Provides a basic
audio (red/white) cables that connection
provide a basic connection from for antenna or cable.
the cable box and other devices. Provides both audio
Note : The color of audio inputs
and video.
may differ, e.g. red/white or
red/black.
Basic
Connect RF cable
A
from wall to input at
RF
the back of the cable
Provides a basic box.
connection
for antenna or cable.
Use second RF cable to
Provides both audio
B
and video. connect the cable box
to the TV input (75 ).
Note: This connection gives
mono sound. For stereo
sound use also composite
audio/video connection
(Refer to panel 2).
Back of Cable Box
Set output switch
VIDEO
C
IN OUT
on set-top box to
S-VIDEO
CH 3 or 4 and tune
Pr
TV to same channel.
OPTICAL
SPDIF
Other Possible
Connections
Component
Video
Refer to panel 2.
Basic