Advertisement
How to Set the Chan
BLOCK
Make sure that the clock has been set correctly before setting the channel BLOCK.
Example: To set the BLOCK for a program which begins at 9:30 AM on channel 8
Press TIMER/BLOCK three times to change from "normal
1
page" to "BLOCK page."
TIMER/BLOCK
"BLOCK page"
(indications in red)
Press 0, 9, 3, 0, ENTER (0 necessary).
Numbers will "wink" to indicate that the time has been set.
Press 8, ENTER (0 not necessary).
Numbers will "wink" to indicate that the channel has been
set.
The BLOCK has now been set.
If you have made a mistake, press CLEAR and return to step 2.
At the preset time, the picture of the selected channel will be
blocked from view and the sound will be muted.
A red "BLOCKED" indication will appear on the screen while the
channel is blocked.
Normal reception will be resumed after 12 hours.
To return to normal reception while the channel is blocked,
recall "BLOCK page" and press CLEAR.
The BLOCK setting blocks a specified channel for the same
12-hour period everyday.
To clear BLOCK setting, summon "BLOCK page" and press
CLEAR.
To reset, clear the setting and follow the steps above from
step 2.
Z|
Advertisement
