Pioneer VSX-405 Service Manual page 35

REAR PANEL FACILITIES
Illustration shows VSX-405 Multi-voltage model.
c ® O@
VSX-405, VSX-305
1 FM/AM ANTENNA terminals
2 VCR/TAPE 1 jacks
Connect to the first cassette deck or a VCR. With a VCR,
also connect the video jacks.
3 LD/DVD input jacks
4 VIDEO OUT (TO MONITOR TV) jack
5 FRONT SPEAKERS terminals
A: Connect to the first set of speakers.
B: Connect to the second set of speakers.
NOTE:
Do not allow any of the cord's conductors to protrude from the
terminals or touch any other conductors. Malfunctions or break-
downs may occur when conductors come into contact with each
other. Use front speakers with an impedance of 82 to 16.
6 TWO VOLTAGE SELECTORS switches
(Multi-voltage model only)
7 PHONO input jacks
Connect to the output cables from a turntable.
8 GND terminal
Connect the turntable ground lead to this terminal.
BE
"@®rO Ore»
39 TAPE 2 MONITOR jacks
Connect to audio components such as a second cassette deck or
a graphic equalizer.
10 CD input jacks
11 CONTROL OUT jacks
OUT: Connect this jack to other Pioneer components
when using the remote control of this unit to
control the other components.
CONTROL
a) IN
so a Qour
Receiver =
Pioneer component
bearing the §] mark.
To the CONTROL IN
jack of the Pioneer
component bearing
the ff] mark.
Remote control unit