Important Notes; The Care Of Your; Connections - Roland PK-5 Owner's Manual

Dynamic midi pedal
Table of Contents

Advertisement

IMPORTANT NOTES
e
If you wish to use the PK-5 with external AC Adaptor type BOSS ACA (optional) please follow these precautions:
e
The appropriate power supply for the instrument is shown on the AC ADAPTOR name plate. Please make sure
that the line voltage in your country meets the requirements.
e
Please dot not use the same socket used for any noise generating device (such as a motor, variable lighting system).
« It is normal for this unit to become hot while being operated.
¢
If the unit is not to be used for a long period of time, unplug the external AC Adaptor from the AC line.
©
Disconnect the AC Adaptor immediately in the event of an electrical storm
¢
Before setting up this keyboard with other MIDI devices, turn this keyboard off along with all other units.
*
Be sure to connect the MIDI cables securely. If the MIDI cable is disconnected while the instrument is being
played, various troubles will occur (e.g. the note may continue to sound).
e
Static electricity may cause the built-in computer to malfunction. Should this occur, simply reset the instrument
by turning the power switch off and then after a few seconds, back on.
¢ This instrument might not operate correctly if turned on immediately after being turned off. If this happens,
simply turn it off and after a few seconds later, turn it on again.
¢
Operating the PK-5 near a neon light, fluorescent lamp, TV or CRT display, may cause noise interference. If
so, change the position of the instrument.
¢
To avoid risk of electric shock, do not perform any servicing. Refer all servicing to qualified service personnel.
THE CARE OF YOUR PK-5
To ensure the best use and full enjoyment of your PK-5, please read this guide carefully and thoroughly.
ROOM LOCATION
Avoid using this instrument in excessive heat or humidity conditions or where it may be affected by direct sunlight
or dust and avoid places subject to high vibrations.
CABINET CARE
Use a soft dry cloth for dusting. To remove fingerprints or dulling film, use a soft cloth slightly dampened with
water and a little mild detergent. Immediately wipe dry with a soft cloth. Do not use solvents such as paint thinners.
CONNECTIONS
[1] MIDI Sockets (IN/OUT/THRU)
[2] AC Adaptor socket
To connect with household AC current, use only the optional AC ADAPTOR (model BOSS ACA)
[3] POWER ON/OFF switch

Advertisement

Table of Contents
loading

Table of Contents