Advertisement
3. DISASSEMBLY
3.1 PANEL AND BASE
In removing the panel, follow the below listed
steps in the order given.
Using any unnecessary
force will result in bending the springs or damaging
other parts.
Panel removal steps
1. Remove
the headshell
and weight assembly,
and the weight shaft assembly.
The
weight
shaft
assembly
is removed
by
loosening
screw
(Hexagone
socket
screw)
and the headshell by loosening screw @ .
2. Lift off the turntable platter.
Turntable
platter
3.
AD
oP
Panel
Motor —
assembly | |=
Ae
| omen
EN
Base
Dust cover
Loosen
insulator
attachment
screws
@ and
remove the insulator.
(Do not mix the color-
coded
float springs.
They must be replaced
with their original insulators during reassemb-
ly.)
. Remove
the rear panel PU cord strain relief.
- Unplug the 2P and 5P connectors.
. Completely remove the PU cord from the panel.
Lift up the headshell
end
of the tonearm,
and taking care not to damage the tonearm,
remove
it from the panel.
(Hold the tonearm
steady.)
Weight assembly
Screw 8
Rubber bush
Control mechanism
assembly
Insulator
z
Fig. 3-1 Disassembly
Advertisement
