Connecting other appliances
TV / VCR / DVD mode selector
The remote control allows you to control the main functions of your video recorder or DVD.
TV
1
2
VCR
DVD
4
5
7
8
SMART
0
MENU
OK
3
6
9
SMART
P
OSD
Connect other appliances as shown opposite.
Select EXT3 by pressing
For a mono set, connect the sound signal to the AUDIO L (or
AUDIO R) input.The sound automatically comes out of the
left and right speakers of the set.
Headphones
Keys
allow you to adjust the volume on the
headphones and on the set. Press
off the sound on the set.
The headphones must have an impedance of between 32
and 600 ohms.
Set the switch on the side of the remote control to
the required mode:TV,VCR (video recorder) or DVD.
Then press one of the following keys:
standby
contrast + setting *
enter a number
bring up a menu *
select (
) and set (
select programme,
record *,
rewind,
stop,
play,
fast forward,
programming *,
confirm*
OK
pause
* Some programming functions are not available on all
models (cursors, menu, OK key, etc.).
The remote control is compatible with all the video
recorders in our range as well as models which use the
RC5 signalling standard.
.
if you want to cut
) *
13