Advertisement
4. aSSeMBLy
4.1. Assemble the workbench following the sequence below, referencing the parts list overleaf.
Fig.1
4.2.
Lay the whole package down on the ground with the table top (1) facing down, see fig.1.
4.3.
Lift the H leg frames (2) upright as per the above diagram and insert the leg frames (2) into the slots on each side of the table top (1),
see fig.1.
4.4.
Fix the leg frames (2) to the table top (1) using pan head bolts (4) and hex nuts (5), see fig.1.
4.5.
Turn the work bench so it is the right way up, see fig.2.
4.6.
Attach the horizontal back brace (3) and fix it to the leg frames (2) using pan head bolts (4) and hex nuts (5), see fig.2.
Fig.3
4.7.
Assembly is now complete and the work bench is ready to use, see fig.3.
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
Recycle unwanted materials instead of disposing of them as waste. all tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTaNT: No liability is accepted for incorrect use of this product.
WaRRaNTy: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
environmental Protection
Sole UK Distributor, Sealey Group.
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk.
IP32 7AR
Original Language Version
Fig.2
01284 757500
01284 703534
www.sealey.co.uk
Web
sales@sealey.co.uk
AP0618.V2 Issue 2 27/01/16
Advertisement
